Slashdot Mirror
Surprising Science Demonstrations?
An anonymous reader writes: "I have been called upon to conduct some science workshops for children of various ages, and I'm looking for some good demos. In particular, I've found that demos are most effective at getting students to think when they give a surprising or unexpected result, such as the classic two-slit experiment (or, for the extreme crowd, demonstrating the Leidenfrost effect by sticking one's hand into a vat of molten lead [PDF]). I'd like the Slashdot crowd's suggestions." Please don't do the lead one.
Anything that explodes is cool. Baking soda and vinegar, Sodium and water, Magnesium and fire, drano and tinfoil... :)
There's always a chunk of sodium and a beaker full of water.
using namespace slashdot;
troll::post();
Put some sugar (white cane) 1/4 full into a test tube. Pour on sulphuric acid to 1/2 full. Wait for a 1-2 minutes and watch the carbon rod emerge from the test tube amidst smoke!
It's funny to watch.
Try doing any chemistry experiment which results in a drastic color change. You can start with colorless reactants in separate beakers, and the mix them to produce a bright blue colored liquid(yeah Copper).
-- Reality is just an extended dream.
this worked before in a chemistry demo i gave in high school. It gives an unexpected result and it is colorful to boot :-) http://jchemed.chem.wisc.edu/JCESoft/CCA/CCA2/MAIN /AMFOUNT1/CD2R1.HTM for more details
well, you could always do the leidenfrost effect. Putting your hand in boiling lead is always a shocker!
y 320005/pdf/leidenfrost_essay.pdf
here's a pdf explaing it:
http://www.wiley.com/legacy/college/phy/hallida
Disco Stu was talkin' to you.
put a little wax in a foil dish, heat it over an Bunsen burner, then squirt water at it... HUGE fireball... People don't think it will happen, but it does, it also seems to be safer than oil
Another one my chem teacher did was taking water and separating it into oxygen and hydrogen by using a battery and matching the terminals, then letting the hydrogen into a test tube and light it to make a loud "pop!"
Also, anything that disolves metal with a liquid is good, like magnesium and acid or such.
1: Using compressed air to shoot a pencil through a peice off 1/2 inch thick plywood
2: Using a large solenoid to magnetically rip apart an aluminum can (can is placed in the center of the circle of wires and large AC is momentarily applied)
3: Pouring liquid nitrogen on your hand (the back, not your cupped hand)
4: Making liquid nitrogen ice cream (pour some LN2 into a cup of milk, stir rapidly)
5 Superconducting magnetic levitation (small permanent magnet over a critically cooled superconductor)
6:The ever classic fire extinguisher used to propel a person across a room in a rolling chair
7: compairing the explosions made by a baloon filled with air and h2, h2, and one with both H2 and O2 in proper amounts
When I was young, a chem teacher did a demo where he covered a dollar bill in some form type of alcohol, and burned it... the alcohol burned at a much lower temp than the bill... so the bill stayed intact. Looked pretty cool though. You'd probably have to try a few different alcohols to find one that made a visible flame (lots of them burn with a flame that you can hardly see).
- take a 2L pop bottle. put some muratic acid in (not much), and some strips of tin foil. cap the bottle, then throw it far away. get everyone back and watch as it swells to watermelon size then explode.
- brake fluid + powdered pool cleaner = lots of smoke and fire.
- make some sulfuric acid: heat some sulfur, catch the fumes in a jar, add water and mix.
- magnesium + water! need i say more
:)
i used to do these when i was in jr high. minus the ass part though.,
faeryman
Get some milk, some cream, some sugar, some vanilla, and any other candies you may want to add, mix it with LN2 until it's frozen, and eat!!! "Steams" a lot (the steam is actually frozen water vapor). Directions here Yum!
The University of Wisconsin has a site at http://genchem.chem.wisc.edu/demonstrations/ that contains links to dozens of demos (with raitings) for various categories. I'm sure there is something for each age/interest level there
Get a petri dish, a plate magnet, a superconductor, and some liquid nitrogen. Put the petri dish on top of the plate magnet, and the superconductor inside the petri dish. Slowly pour in the liquid nitrogen. When the superconductor reaches superconductivity, it'll float.
(or do something along those lines...)
~A'Ëq'i4d)^'$ÊSÈòB
The inanimate carbon rod?
"In rod we trust"
I would suggest the use of a microwave oven and a variety of things, my favorites are:
1: Lightbulb, metal in milk to insulate, don't use anything with mercury in it.
2: CD-Rom (all kinds work, try different ones)
3: place a toothpick in a peice of cork, place in center of microwave, place 3 peices of cork around center cork and support fishbowl(any peice of glass that is globe like will work, the more like a globe the better) light the toothpick, place glass on top of corks around edge(for ventilation) and start microwave
4. grape, cut the grape in half, then carefully slice the grape again in half, but leave small peice of skin connecting quarters. Fold together to make a flat side and place on microwave floor.
Hints: use old microwave, preferably with clear front faraday cage setup, in addition to this also place a glass of water in the back of the microwave to avoid destroying the magnetio. Tinfoil and other items are fun too, play around and have fun. Ohhh yea, no gerbils etc. Have fun.
Theodore Gray, of Mathematica fame, and recent winner of an IgNobel prize for his wooden periodic table table has a page nicely documenting what happens when you drop sodium into water, which includes a nice quicktime video of a drop of sodium into a lake.
It's psychosomatic. You need a lobotomy. I'll get a saw.
I wish I could be thirteen again so I could find that link half as funny as you did.
I don't think the kids' parents would be too pleased if you did any of that. 8O
I place the blame squarely upon tight pants.
http://jchemed.chem.wisc.edu/JCESoft/CCA/CCA2/M
But better than a demonstration is anything hands-on, especially with young kids. You can do some cool stuff with the new neodymium magnets. You can hook up an oscilloscope to a microphone and let them look at their voices. (Or use computer oscilloscope software.)
Find free books.
(or, for the extreme crowd, demonstrating the Leidenfrost effect by sticking one's hand into a vat of molten lead [PDF]).
Ah yes, this would be the one where the paper says, "Never, ever do this.". [If you use too much water, you get a steam explosion that sends molten lead everywhere.]
You might be able to do a safer variant by dipping apples or bananas or what-have-you, though, with a blast shield between the crucible and the audience, though (and a leather apron and gauntlets and visor, unless you *like* liquid metal scars).
My favorite was always the standing fire wave. First, take a metal pipe and cap both ends. Drill hole at even intervals along the end of the pipe. Cap both ends, but put a speaker on one end. Also, attach a nozzle where you can pump gas into the pipe. For the show, hook the gas line up to the nozzle and turn it on. Next, set a fire on the gas coming out of each hole. You should get a series of flames of even height. Now turn on the speaker and hook it up to source with a constant frequency. If you set the frequency to one of the resonant frequencies of the tube, you should see the flames forming a wave. (Please note, I am just trying to recall how this was done from memory. I may have left out some crucial step that stops this from just being one big pipe bomb. Don't try this at home unless you are sure of what you are doing.)
The book is chock full of science-geekly fun. The demonstrations are clear and exciting. Kids will love them. The accompanying explanations are in-depth. If you do them all and learn why they work, you'll soak up a fair amount of physics.
Suspend a cinder brick (or other heavy object) from the ceiling with a rope. Pull it back until it just touches your forehead and let go so it swings like a pendulum. It you don't move, it will just touch your forehead on the return swing (or a little short of it). Listen to the gasps of horror from those in your audience who think your head is about to be smashed.
Yet Another Web Site
I have a few cubes of elemental potassium (stored in anhydrous mineral oil!) It's a greyish-silver chunk of metal in a cube about the size of a bullion cube. It is soft; you can cut the edge off with an X-acto knife. A small chip about the size of a grain of rice when thrown into water (toilet bowl) will fizzle and dance around and burst into a cool purple flame!
I also have some elemental Sodium, which will also fizzle and dance on the water, but will not burst aflame, unless you put it into a wad of spittle (yecch!) then it bursts into a bright yellow-orange flame.
-- You are in a maze of little, twisty passages, all different... --
Just have a vat of liquid nitogen, put in something (a rose for example), remove it and shatter it by throwing it on the floor (or use a hammer). Fun experiment, and looks impressive with the fumes of the liquid nitrogen ;-)
I wouldn't try the hand-in-boiling-lead anytime soon. Back when I was a kid, I made figures out of lead and I got some nice burns because of that. Lead splatting on your hands is not fun, and the Leidenfrost experiment didn't really help.
Ahhh...the great dumpster continuum. Many a free computer will be found there. -- sowth (748135)
On the discharge side of a shop vacuum (such that it is blowing) put an large funnel, this makes a diffuser. Though the air is blowing out, objects will be sucked into the diffuser because the higher air velocity in the back of the diffuser creates a lower pressure, (Bernoulli principle, conservation of energy). Counter intuitive, and cool, one of my favorite demos when I taught physics. Another cool demo is how to make a Magneto-Hydrodynamic engine in a petri - dish, a battery current causes the water to swirl, email for details. MM
My physics professor did some neat demonstrations about constructive and destructive interference of waves. One of the experiments involved setting up two speakers side by side, playing the same note. As he rotated the set of speakers, the constructive and destructive fringes would pass over each member of the audience. To be effective, you need to get the right combination of separation of speakers and note.
It might not be as impressive to kids who weren't studying sound waves, though.
The American Chemical Society (ACS.org) and affiliated sections are full of resources for this sort of thing. Every year they put on a big program called National Chemistry Week'. The National Academy of Sciences (nas.edu, nationalacademies.org) has outreach programs as well.
Get a pound or so of finely divided iron, a bunsen burner, and a fan. Turn the fan on "high" and point it towards the burner and release the powdered iron. Guaranteed excitement!
---
I didn't want to leave this space blank.
I saw one once in junior high, where some guy place some newspaper sheets that were unfolded ontop of a yardstick, and made sure there were no airbubbles or anything like that. The yardstick was on top of a table sticking out about halfway, when he hit the yardstick, and it broke. Somthing about the surface area of the newspaper x psi of atmosphere > force on stick. Also, try goobleck. It's a cornstarch based substance that behaves as a solid or a liquid. Water is the other ingredient, but I don't remember the ratio. If you stick your fingers into a bowl and try to pull out quickly, your hand will get get stuck as if it were a solid.
Nice Marmot
The Physics department head at the college I attended was constantly doing High school demos.
One I found interesting involved a long aluminum pipe a steel cylinder just small enough to fit in the pipe and a cylindrical magnet (or cylider containing a magnet) of the same size.
First demonstate that the magnet is not attracted to the aluminum by pressing against the pipe.
Then drop the steel slug through the pipe. It should slide through unhindered and quickly fall out the other side.
Now drop the magnet through the pipe. The moving magnet will induce an electric field in the pipe which in turn induces a magnetic field and slows the magnet. And hence it falls very slowly.
Then of course there are the two syringes of different diameter coupled by a plastic tube to illustrate hydraulics.
Or you could stick some flys in a microwave. They live because their bodys are to small to absorb the radiation. This one really needs a kitten to set up with though....
"A language that doesn't affect the way you think about programming, is not worth knowing" - Alan Perlis
If you have the room (and access to the equipment), you could try showing off stuff like Tesla coils, plasma balls, those 'Earthquake in a Can' thins (sry, can't think of the proper name), and such. I know I loved that stuff when I was a kid (er, well I guess I still do!).
I place the blame squarely upon tight pants.
Many years ago, I did a couple of science programs as part of a science after-school program at a downtown middle school.
First one was chemistry. Did a mixture of hands on plus some interesting demos. Hands on was stuff that was designed to be SAFE - indicators, baking soda and vinegar, etc. Demos were designed to be visually interesting. Burning magnesium, volcano (ignite ammonium dichromate), thermite, fun with liquid nitrogen. (Keep the kids WELL BACK for these). The kids loved it.
Second one was on crypto - simple encoding, decoding, and cryptanalysis (breaking caesar cipher by brute force, and substitution cipher by letter frequency analysis). Kids were divided into teams of four for a set of exercises. One of the teachers told me the kids were passing encoded messages in class for weeks afterwards.
Make sure the kids have fun AND learn something and you'll be successful. Good luck.
[Insert pithy quote here]
but when I was in 6th grade, I did a magic show with chemistry stuff...my dad was a chemistry teacher in high school and gave me some salts....I forget what exactly they were potasium and some other kind. any way, I labled it as turning 2 solids into a liquid.....the kids seemed to be impressed, though I found out the hard way that it made amonea or an amonea type substance.
it was pretty cool.
I am the Alpha and the Omega-3
lemon power
or
cedu.niu.edu
or more google
Boiling water in a paper cup: the cup must not be coated with wax, it works because paper burns at 451 F, and water boils at 212 F. Just keep the flames low enough that the rim of the cup doesn't light up.
Crushing cans: There are several variants, but the cheapest one involves putting some water in the bottom of an otherwise empty soda can. Boil the water until you see steam coming out. Then, quickly tip the can over in to about an inch or two of cool water.
Mag-Lev: find an aluminum pot lid. Everyone knows that aluminum isn't magnetic, right? Well, rig up the lid so that it's attached to a drill. Take a small disk magnet (rare earth works best) and attach it to an armature (easiest way is to take some sort of steel latch or hinge and just stick the magnet to it). Spin up the lid, and hold the magnet over it with the armature. The key is that if it weren't for the mag lev effect, it would fall on to the pot lid.
Angular momentum: Student + weights they can hold + disk they can sit on and spin = good fun. Show them how pulling the masses is speeds them up, and holding them out slows them down.
There's a whole lot more, but that's all I can think of right now.
BlackGriffen
One of the most educational (and fiery) demos I ever saw was a demonstration of the effect of aeration on flame.
Take a large ladle and pack it full of a fine dry flammable. The demo I saw used fine sawdust, but flour (or coal dust!) should also work. Light the contents of the ladle, they will just smolder. Then swoosh the ladle hard through the air. The smoldering fine particulates will get mixed with air and a nice fireball will result. A great demo of how flame depends on oxygen as well as fuel.
If you put you thumb over the end of a paper (or plastic) straw
you can jab it through a raw potato like a dagger.
Sealing the end allows the air pressure to build up and make the straw super rigid.
Run an electric current through some soapy water. Then just poke the bubbles with a smoldering toothpick. You could even let some of the kids hold the bubbles.
-- Remember, we're not happy until you're not happy. -- Local FAA Inspector --
fasten a small weight to the end of a rope and hang it from a horizontal rod while holding the other end of the rope on the other side of the rod. let go and the weight falls.
if you wrap the rope a few times around the rod and then let it go it won't fall. no knots are tied in the rope so the only thing holding it is the friction between the rod and the rope.
the amount of friction increases as the rope is looped more times around the rod. this is why it falls when its only half looped around the rod in the first instance.
the number of times the rope needs to be looped around the rod depends on the type of rod, rope and weight used but it will work for any combination if there is space on the rod for enough loops.
How about this? It's amazing what you can do with just a few carefully placed permanent magnets... look, ma, no electricity!
--Larry
Never attribute to malice that which is adequately explained by incompetence
One of the more surprising experiments I rememberd from high school where the teacher took two perfectly clear liquids--water, for all we know--an poured them together. They instantly turned a bright, fire-hydrant yellow. There were gasps all around the room.
I don't remember what the two substances were, but I seem to recall that one was lead-based and the lead combined with something else to form the precipitate (it later settled to the bottom, I think).
I'm sure any competent chemist, especially one in the paint industry, should be able to point you in the right direction for something like this.
My personal favorite experiments are those where I personally confirmed some fundamental property of nature. I've ``proven'' that absolute zero is about minues three-fifty Fahrenheit; distinguished lead shot from iron shot from tin shot by calculating their specific heat; and measured the speed of sound using a tuning fork.
Don't just tell the kids some fact. Give them the chance to prove it for themselves.
Cheers,
b&
All but God can prove this sentence true.
I might not remember the experiment entirely, but i loved it when we experimented with luminol. I think you can produce the glowing blue effect by dropping bleach into the luminol. Of course it always works with blood :-P
Kids love glowing/shiny things...it should be great to demo
Although explosions, dangerous chemical reactions, and plasma weapons are fun and exciting, realistically most are not that feasible.
m l is the link. Depending on your acting, this can be great! The teacher I was observing had the whole class of high school students faked out and going "Ewwww!" the whole time.
A great one I saw is a bit more dependant on thinking and getting the imagination of the kids to run, involving the new species of sewer lice found in German sewers blah blah blah.
http://www.flinnsci.com/homepage/bio/sewerlice.ht
I seem to recall a demo where a very small dab of petroleum jelly was immersed briefly in liquid nitrogen, removed, and then struck with a hammer.
VERY LOUD BANG!
Take a tennis ball and a basketball. Bounce each separately in front of the kids. The place the tennis ball on top of the basketball and drop both. If you do it right, so the two are in contact when the basketball hits the floor, it will definitely shock them. The basketball will hardly bounce as its kinetic energy is transfered to the tennis ball. The tennis ball will shoot up into the air as if fired from a cannon! Be sure to have lots of head room for this one.
If you were to release the cinder block with the flat side facing you and the rope attached in the middle, were it to turn in mid-swing and come back with at a 45 degree angle to the release position it would most surely split the skin from hairline to eyebrow.
Back in college we (the Society of Physics Students) would have a demonstration of stupid physics tricks. Try some:
1 - Spewing liquid nitrogen. WARNING: I've done this but if you screw it up it is your own fault and will HURT YOU. It is possible to take a mouthful of LN2 then immediately spray it back out in an impressive cloud of vapor. This works because a tiny layer of LN2 vaporizes when it hits your tongue, thereby insulating you from the LN2. This effect is very short-lived and you can FROSTBITE YOUR TONGUE if you don't immediately spew it back out!!!
2 -- Balloons in a trash can. Put 1 inch of LN2 in the bottom of a trash can (you *might* get this to work with dry ice -- easier to come by). Ask the audience to guess how many balloons will fit in the trash can (don't let them see the LN2!)Begin dropping balloons into the trash can. The balloons will shrink to a fraction of their room temp size as they cool down. Think "clowns in a car" for geeks.
3 -- Bed of Nails. I've lain on a bed of nails built out of heavy plywood and standard nails. This takes work to build: the nails MUST all stick out exactly the same distance through the wood, and you should remove any burrs or extremely sharp tips. I *believe* we used nails on a 1 inch grid (which was overkill for safety). USE A PILLOW! Your head is heavy and ROUNDED -- it will end up supported on only about 4 nails: NOT ENOUGH. You may want to do a little research to get the optimal grid size "nailed down".
4 -- Corn starch solution: Cool stuff. Under pressure a thick corn starch solution will act like a solid. Without pressure it is a liquid. Fill a pan with it, demonstrate that it flows, then (with viewers gathered around) slap your hand into it hard. They'll expect a splash that never comes. This works because corn starch is a long molecule that curls under pressure, interlocking the molecules into a "pseudo-solid". Throw it back and forth like a ball. Don't pause, though: the impact with your hand will keep it solid only for a second before it "melts" again!
5 -- Get a large piece of Transparent Aluminum, a sonic screwdriver, and a tribble.
Actually, that one tends to offend squemish members of the audience, so we'll skip it here...
Life is short: void the warranty.
concentrated sulfuric acid + hexane = BIG BOOM!!! of course, make sure its LESS THAN A DROP of hexane, and not much sulfuric acid... my chem teacher pulled this one off by accident.
he put some hexane in a sink, the NEXT DAY he comes in and for a demo pours some sulfuric acid in the sink and a huge fireball resulted!
I've always wanted to have a multi-day demo, where I would use a closed box and marbles, similiar to a Pachinko machine. There would be marbles of slightly different sizes, different weights and different colors. (Only the different colors would be immediately obvious to the observers.) I would put marbles in the top and they would come out of the bottom. Different places depending on certain criteria. For example, on the first day the red marbles would come out on the left, the green marbles would come out on the right and the blue in the middle. I would ask the students to a) predict where the marble I was putting in would come out, and b) how the result was accomplished. At the end of the class, I would open the box to reveal the various mechanisms. I would have several of these boxes, making the deductions increasingly difficult each day.
- Get a lightweight, 2-prong extension cord.
- Do not plug it in yet.
- Bare the ends, and wrap them around two medium-large nails.
- Insert the nails into the pickle.
- With all hands off the pickle and the bare metal, plug in the cord.
- Observe that the pickle glows around the contact points with the nails.
Caution:- Never tough the pickle or the bare metal while the cord is plugged in: shock hazard (duh
:-)
- Put the pickle on a non-conductive surface, e.g. sheet of wood.
- Consider doing it out doors, as it smokes and is smelly.
- Adult supervision required. You assume all risk.
Crispin----
Crispin Cowan, Ph.D.
Chief Scientist, WireX Communications, Inc.
Immunix: Security Hardened Linux Distribution
Available for purchase
(I saw this in a chem lecture a few weeks ago).
Get a ceramic container with a hole in the bottom. Put some steel wool to cover the hole and put some Iron Oxide (Rust) and aluminum shavings. Get a container to hold some molten iron underneath it. Stick a magnesium fuse in the ceramic container, light, stand back and watch.
Lots of light, some heat, and a quick reaction as the molten iron pours out the bottom of the container. You probably don't want anybody too near it though.
Although filling 3 balloons, one with Helium, one with Hydrogen, and one with oxygen, and then touching them off one at a time was good to watch also. (No boom, small boom, Big Boom). It also isn't quite so destructive.
And yes, I am a college student that saw these both in chem lecture in the last month.
I recommend Vacuum Bazookas, Electric Rainbow Jelly, and 27 Other Saturday Science Projects. Loads of fun things to do, and each project includes a section for the science behind the project, which will allow you to get as in-depth as you want.
www.scifun.org is a good website oriented toward experiments that can be performed with household items. There's also a TV show that corresponds to the website that has been playing nightly on PBS (in the Seattle area, anyway).
Let's try not to let fact interfere with our speculation here, OK?
Of course this one is great, especially this time of year. http://www.mun.ca/educ/ed4361/virtual_academy/camp us_a/woodlandm/Demo1.html.
Chemical Magic - 2nd edition
L.A.Ford, E.W.Grundmeier (Designer)
Dover Pubications (August 1993)
ISBN: 0486676285
There is one that's especially good for Halloween, where it starts out whit, and after about a 20 second delay, turns orange, and then another 20 seconds or so, turns black. It's a Potassium dichromate experiment that's pretty cool (it's an endothermic reastion that causes the color change for yellow (hidden in the white) through orange, to black (a dark blue/black).
You may also want to look at:
http://scifun.chem.wisc.edu/demoser.html
And:
Chemical Demonstrations - A Sourcebook for Teachers - 2nd edition
L.R.Summerlin, J.L.Ealy Jr.
Amer.Chem.Soc. (1988)
ISBN 0-8412-1481-6 (v1), 0-8412-1535-9 (v2)
-- Terry
put a bit of water into a coke can and heat it over a stove until most of the water is steaming off.
grab it quickly (not with your hands, I guess) and put it face down into a basin of cold water.
it compresses the can pretty well :D
while on the topic of compression, get a 2l coke bottle (yes, you can do lots of things with pop!) and half fill it with water and pump a few bars or air into it (check what the maximum capacity is - i think below 10 bars should be safe). Makes a good rocket when you let go.
I am unique, just like you, and you, and you...
To do this, put some sugar in a beaker under a fume hood and use tongs to pour a bit of concentrated sulphuric acid on it from a second beaker. The acid catalyzes water extraction from the sugar (which is exothermic), giving you a big mass of carbon puffed up with steam. This sponge is much larger than the original sugar sample (demo looks coolest if this greatly overflows the beaker; you get a column of carbon coming out of it).
Handle the acid with great respect, as it'll eat through anything organic or metallic. Phosphoric acid probably works for this too, though I haven't seen it done.
Inflate a balloon, tie a string to it, and then lower it into a dewar of liquid nitrogen. As the balloon approaches the nitrogen, the air nearest it cools and becomes a lot more compact (remember gas laws). What you end up with is something that looks like a deflated balloon, with either very cold air or (if you dunked it) liquid oxygen and nitrogen in it. Leave it on a counter, and it may re-inflate (try not to freeze all of the rubber if you want it to do this).
Dip just about anything containing water into liquid nitrogen, and it turns into a rock. Do this with something fragile, like a flower, and you get a flower that shatters as if it was made of glass when you tap it on a desk. This is very impressive.
I've heard of someone dunking a banana and shattering it with a hammer, but you'd have to leave it in for quite a while to make sure it's good and cold. When I tried similar things, the ice deformed instead of shattering.
This one only works if you have a high-powered laser handy. I suppose in a pinch a sufficiently powerful ordinary light source would do too. Stick a coloured balloon inside a transparent one, inflate the inner balloon half way, tie it off, and then inflate the outer balloon fully. You end up with a coloured balloon inside a transparent one. Shine a laser or other very bright, localized light through the balloons and the coloured balloon will have a hole melted in it and pop, leaving the transparent balloon intact.
This was a fun demo put on by the local science centre. I suppose you could use a fresnel lens to focus sunlight down, but a) that's cheating and b) that works by a different method (the hot spot is only at the focal point).
Do do this demo, mount a speaker and a microphone next to a target. For best results, use a directional mic and the mic/target line at right angles to the speaker/target line (i.e. pick up sound from the target, not the speaker). Place an object prone to vibration (like a wine glass or other drinking glass) in the target zone, turn on your amp, and tap the glass's rim. It will shatter very shortly.
Get a glass or plastic tube, fill it a third full of water, seal the ends in a way that's waterproof, and lay it on its side. Put a speaker at one end, and hook up a signal generator to an amp to feed the speaker. Feed it with a sine wave and vary the range from about 1-10 kHz. When the frequency matches one of the resonant frequencies of the air channel in the tube, water "walls" will form at the antinodes due to the pressure vibration at the nodes exerts on the surface of the water.
I suppose if you turned the power up sufficiently you could get the same thing happening in a tilted or even vertical tube, but this would get quite loud and possibly dangerous (if you hit a resonant frequency of part of your support frame, vibration could damage a tube made of glass).
Fill beakers or glasses with coloured water (or kool-aid), and then either drop in a pellet of dry ice or pour on a couple of teaspoons of liquid nitrogen. Both will sit on a vapour cushion on top of the water for quite a while, and the cold will make dense fog on top of the water. Instant mist-boiling potion.
If you decide to drink this, use dry ice instead of liquid nitrogen, and blow out when you sip so the pellet drifts away from you. Better yet, don't drink from it at all. Frostbite isn't fun.
This is a fun and safe demo, but needs to be done in a fume hood due to fumes and sparks. Set up a retort stand holding two or three small cans. Cut the tops off of the cans, and fill them half full of sand. Line up the cans over each other, and put a patio stone or similar large flat slab of stone or concrete under the retort. Put a large can filled with sand on top of the stone, under the bottommost can. Over the topmost can put a ring stand with a piece of steel mesh you don't mind losing. Put a piece of paper or tissue on top of this, and put a small pile of thermite powder on the paper. Put on a leather gauntlet, and use a firework sparkler to touch off the thermite (ignition temperature is higher than an ordinary flame provides, a burner flame may detonate the pile, and a sparkler is safer than a powder trail of something easier to ignite). Optionally, put a small amount of something more sensitive on top of the thermite and light that with a burning wooden splint, but a sparkler is both simpler and safer.
NOTE: Do this with the fume hood down most of the way, and for safest results put a blast shield in front of the retort stand. There will be many, many sparks thrown by this demo.
The thermite will burn very brightly yellow-white, and will throw sparks everywhere and give off vapours (probably either water from the paper, or boiling iron oxide that wasn't consumed; I haven't checked). The thermite will burn the paper almost instantly, dumping white-hot molten iron through the rapidly disintegrating screen, through the sand in each can, through the bottom of each can, and down to the large can of sand at the bottom of the retort stand. It may eat through the bottom of this, but at worst will just slightly etch the stone (the stone won't react catastrophically with molten iron, and has enough heat capacity that you certainly won't melt through it and is thick enough that it won't crack through from heat shock).
This demo is quite safe, with proper precautions, and very impressive.
Lastly, things not to do. This is not an exhaustive list:
If done right, this can be safe, as water boiling off your hand forms a vapour cushion briefly. This is easy to screw up, and has drastic consequences if anything goes wrong. Don't do it.
This can also be done safely if done right, for the same reason - the dry ice or liquid nitrogen boils, forming an insulating vapour cushion. Briefly. If you hold it too long, or are just unlucky, you get a very painful and inconvenient case of frostbite, or worse. Don't do this.
I've heard of people drinking small amounts of liquid nitrogen. This is beyond stupid.
Protective gear is a must too, but even without it, a spark or a splash will only hurt _you_. Hurting your audience must be avoided at all costs.
Have fun.
I forget the one of the powders used, but basically we welded with thermite set off by glycerin and magnesium *something*. It was really cool, the glycerin reaction lit the thermite which fell onto a pieces of metal and literally welded it together. It ruled, since the reaction wasn't instantaneous, but when it went the ignition of the thermite was awesome...
If anybody knows the other compound used to react with the glycerine please follow up.
my thermo guy always loved sipping and spitting liquid nitrogen. But i wouldn't recommend it--you can crack a tooth. for a simple one, get a metal gas can, heat it up, cap it, and pour cold water on it. Then when you explain to people that the air that surrounds us is what crushed it, it's pretty amazing.
I noticed the PDF explaining how you can soak your hand and dip it into molten lead for a split moment, and you won't suffer any injury.
Would this be possible with a damp finger and standard french fry grease heated to 350 F?
Three that come to mind are.
1. Put candle in middle of a pie tin. Fill tin with water colored with food dye. Light candle then put an inverted jar over the candle and into the water. AS the candle flame uses up the oxygen, the water gets sucked up into the glass jar.
2. Light a candle. Mix some baking soda and vinegar in a jar or glass. Then pour the 'air' (i.e. CO2) in the jar onto the flame to put it out. Some times it helps to make a paper flume to pour the gas down and direct it to the flame, just don't catch the paper on fire.
3. Need a hard boiled egg, a jar with an opening smaller than the egg, and a candle. Light candle in the bottom of the jar, then put the egg on the jar so it seals the opening. The candle burns up the oxygen and atmospheric pressure pushes the egg into the jar.
Have fun!
Although I had chemistry sets from a very early age, the first memorable, school science experiment I recall was in jr. high physics, 1st experiment: describe all the empirically recordable attributes of a lit candle. I don't know why, but I really wanted to ace that one but (bad pun but really) I got smoked.
"Academicians are more likely to share each other's toothbrush than each other's nomenclature."
Cohen
A stream of water is split in two using a tubing "tee". Each stream then is allowed to drop through a bottomless can and into a catching can. The pairs of cans are crosswired and well-insulated. With the water streams breaking up into droplets as they pass through the bottomless cans, an initially slight imbalance of charge is amplified until a spark jumps between them. Typically a 1" spark can be attained after flow of 30 seconds or so. As the charge grows, the water dropplets of each stream repel each other providing an indication of the voltage buildup. If the weather is humid or the insulation of the cans inadequate, the charge leaks away without jumping the gap.
A google search on "Kelvin Water Drop Experiment" gives lots of additional info.
Get a bucket of water, drop a coin in it and run an electric current through it (my father did this with an old telephone-bell-generator). The moment you put your fingers in the water your muscles start to shake and you hardly can get them deeper in it.
bash$
Take an uninflated balloon and place it in a sealed container. Then use an motor pump connected to the container by a hose to pump the air out of it and create vacuum inside. The balloon will "magically" inflate by itself. The end of the balloon has to be tied of course. I saw it in a physics class once - very cool.
Two thoughts:
1) Van de Graaf generators. Lots of fun stuff.
2) I always liked the inductance coil with a ring trick. Hold the ring down over the coil until it gets to hot to hold anymore, then let go and watch it jump off, pick it up, pass it around and let everyone see how hot it is.
How 'bout Tesla Coils!
It would be a fun experiment and it would be great to teach a little about one of the greatest and most underappreciated minds in history. There are tons of pages on how to do his experiments.
http://www.amasci.com/tesla/tesla.html#tplan
Put a half-inch or so of ordinary white sugar in a small beaker and add some *fuming* sulfuric acid. I have no idea of the quantities. Over the next minute or so it turns orange, then begins to smoke and bubble, then turns black as the carbon is stripped out. The carbon is then pushed upward by more carbon, rising straight up out of the beaker to a height of 6 inches or so, like a cylinder of black rock.
The way I saw this demonstrated was in a short film produced by one of my high school classmates. All you saw was the torsos of two guys at a chem lab table, measuring and pouring things, as one of them talked about his dinner at a middle eastern restaurant the night before. As he got to the part where the belly dancer came up to his table, the bubbling and steaming got going. When she started shaking her body in his face the carbon was rising out of the beaker...
Classic.
Lemon-powered light bulbs, glowing pickles... So where's my lemon-powered pickle?
Mutant Freaks of Nature: "Frighteningly Addictive"
take a clear tube and set a candle in the bottom. Then ask the kids what they think would happen if you threw flour in and then do it and you get a nice boom and a dust explosin. i have done it before in front of four graders and it was safe for classroom demonstration and they loved it.
I love gravity experiments, and the "Monkey and the Hunter" experiment is by far my favorite. If I'm shooting a monkey hanging onto a tree, would it be in the monkey's best interest to continue holding onto the branch, or to let go? One would think, let go. But because gravity effects the bullet the same amount as it effects the monkey (save air resistance, but that's why we're using Physics air ;)), letting go will actually increase the chance of a hit.
Another gravity favorite shows the previous result in a slightly different setting. Take a bunch of balls with different weights but equal friction coefficient. Then take a "Pine Wood Derby"-esque ramp and race the balls to the bottom. My brother did this experiment in elementary school, and he was quite suprised to see that the time it took for balls to reah the bottom was independent of weight.
Matt Fahrenbacher
James Tiberius Kirk: "Spock, the women on your planet are logical. No other planet in the galaxy can make that claim."
I can't remember the exact details of this one, but...
I had an instructor who took a paint can with the lid attached. There was a hole in the middle of the lid, and a hole on the side of the can at the bottom. He used the bottom hole to pump the can fill of methane, then lit a match at the top hole where a small flame appeared.
He then continued to lecture as the methane in the can burned, rising in the can and being replaced by air coming in through the side hole.
Everyone had pretty much forgotten about it when the last bit of methane burned out and the flame dipped inside the can. The explosion blew the lid to the roof of the two-story lecture hall!
The birthday paradox is suprising. It is a good example of how bad humans are at calculating probabilities.
:-)
Ask everybody in the workshop to shout out their birthday (day, not year) one at a time, and ask people to raise their hand if they have the same birthday. In a class of 30, the chance of a coincidence is 70% example, explaination.
There is a 50% chance that two people out of a group of 23 will share a birthday.
If noone shares a birthday you may look silly though
My favorite demonstration was an explanation of Galileo's experiment about falling objects at the leaning tower.
." so the prof climbed up on top of the stool. And proceeds to drop pairs of objects to the floor.
The classroom was one of those ampitheater type rooms with a big slate top lab table at the bottom. We were just starting to learn about gravity. The professor (who looked exactly like John Denver - glasses, hair cut, smile, . . . everything) starts telling the legend about Gallileo. He was a great story teller. When he mentions the tower, he puts a lab stool up on the table. Then he says its a leaning tower, so he puts a couple notebooks under the legs to make the stool lean. "Then Galileo climbs the tower . .
I'll never forget watching 'John Denver' standing on top of that 'leaning tower' dropping things to the floor. Or that the objects fell at the same rate regardless of their weight.
I haven't confirmed this one myself, but if it works, it's pretty cool.
1) Get an older microwave. In particular, one without a turntable.
2) Get a microwavable tray as big as possible that will still fit inside the microwave.
3) Fill the microwave with miniature marshmallows.
4) Run the microwave long enough for some of the marshmallows to brown.
5) Measure the distance between the dark mashmallow bands, and convert to meters.
6) Multiply this distance by 2 (or 4?), and then by the microwave frequency, which should be listed on the back of the microwave.
7) If my instructions are correct, you should get a number awfully close to the speed of light.
What I've been told is that the microwaves can form a standing wave. The distance between dark marshmallow bands should be the wavelength, which when multiplied by the frequency, should give you the speed of light. (c = f*w).
"You know, Hobbes, some days even my lucky rocketship underpants don't help" -- Calvin
Well, my sig is about a clear as a foggy day in London. Notice my nick? It says "jawtheshark", that's me... You will find an explanation of the sig here. Yes, I should change it, nobody gets it anyway. :-)
Sorry for posting anonymously, but I'm not going to waste Karma ony you
The most impressive physics demo I've ever seen was with a motor gyroscope. It's quite small in size but it's got a low friction very dense heavy rotor inside (about 10 lbs) which can spin up to very high rpms. It's got two convinient handles along its axis. It is first connected to the outlet and is spun. After it's spining rapidly you cannot change the direction of its axis even when you pick it up in the air and even with two people trying. It's spooky. Imagine picking up a small 10lbs dumbbell and not being able to turn in any way with some invisible force preventing you whichever way you push it!
1. Measure 1/2 a liter of water, put it in a seperate cup. ... and the combined mixture will not have a volume of 1 litre as expected. It will be significantly less -- as in 800 ml... then ask the kids, where did the 20% go? (the molecules interspersed).
2. Measure 1/2 a liter of alcohol; put it in a seperate cup
3. combine the two cups, and measure
I once saw a demo that was about Sound in a enclosed space. A peice of glass is put above a speaker and the speaker is truned on. Nothing happened. Then the speaker is cut of and a plexi glass tank is used to cover it and the speaker turned on and the glass started to vibrate till it shattered. It was a long while ago so I don't rember the details.
This one required quite a bit of work, but you have it forever once you've done it ...
... you die ..."
Make a bed of nails. Probably 50x150, with nails every half-inch or so on a backing of double-thick plywood. You set the stage by taking off your shirt, so it's guaranteed to get attention. Then you simply lay down. This demonstrates how mass can be distributed in a way that no one nail is supporting enough weight to break skin.
My physics teacher in high school did this one, and it has stuck with me lo these many years later.
When he was showing us formulas and equations and such, he always couched them in terms of a person in peril -- standing at the top of a cliff, being whirled around by angular momentum or whatever. The solution to the equation was always accompanied by "And then
All of these lessons have stuck with me far better than my junior-year chemistry lessons, for which the teacher left the class to make soup (don't ask) and drink liquor in the lab and told us to learn it from the book.
If you're going for "most kids won't know the answer", a good one is a cart with a fan mounted on it so that the fan points towards the front of the cart to create an internal force. Ask them if they think the cart will move or not. They'll probably say yes. Flip it on and prove to them it won't move. Then turn the fan around so it points behind the cart, flip it on and watch it go.
Another effective one is lifting a board by using a pool of water that gets frozen by the endothermic reaction in the beaker on top of it. I've seen that one twice.
--
Todd's Law: All things being equal, you lose!
You can never go wrong with one of those spinning rubber belt machines. Two meter long lightings can't but impress any crowd. A giant version of this machine was recently featured in XXX movie (in the dance club)
I forgot the name of this, but I recall an experiment with a liquid that cycled repeatedly through clear, brown, and purple colors (for a while, one of the components (hydrogen peroxide I think) eventually ran out)
Its a pretty display at least.
If I have been able to see further than others, it is because I bought a pair of binoculars.
how about this experement i'm sure it'll amuse the kiddies =)
peek at this site for ideas:
p he re.pdf
http://stanley.chem.lsu.edu/webpub/demo-1-atmos
"There are 11 kinds of people: those who know binary, those who don't, and those who could not care less!"
This is one of my alltime favorites. I've been thinking about getting a vacuum pump so that I can do it in the comfort of my own home.
One cup of water in a vacuum chanber. Pump out the atmosphere. Water boils until only the low energy water is left, which then freezes.
I strongly doubt that any methanol is sold as rubbing alcohol anymore in any civilized country. It takes a decent amount to kill, but not much to permanently blind.
Usually people use isopropanol.
I Can't Believe It's A Law Firm, LLP does not necessarily endorse the contents of this message.
One of the easiest I have seen, is to take equal amounts of water and vinegar, and mix them together. The resulting ammount is not the two added together. So, you can present it as being anti-mathmatical. "One and one does not equal two." you can tell your students, sure to perk up any anti-math students. Or just students who think math is dumb, etc... Another benifit of this experiment is, you can have the students do it themselves, no hazard at all. They can, with their own eyes and hands, measure the exact ammounts going in, and show how much is comeing out. Then go about explaining -why- (size of molecules, etc).
Microft
-Beware of he who would deny you access to information, for in his heart, he dreams himself your master.
One of my favorite simple but elegant experiments is like this: take a big bouncy ball (eg basketball) in your hand and place a small bouncy ball (eg 1/5 the size) on top of the big one so their surfaces touch. Then drop them together on the floor from a small height (eg 2-3 feet). Counterintiutively once they touch the ground the big ball will remain there and not bounce at all while the small ball will fly up 8-10 feet in there (in proportion to the size ratio).
it was cool at the time i swear
I want 2D games back.
he may demonstrate natural selection!
eleven plus two / twelve plus one
This demo (which works very well) shows conservation of momentum. The tennis ball or basketball bounced alone will hit the floor with velocity V relative to the floor and rebound with velocity -V relative to the floor. When you drop the tennisball/basketball combo, the basketball hits the floor first, rebounding with velocity -V as before. The tennis ball, which is still moving downwards, then immediately collides with it at a relative velocity of 2V. The tennis ball rebounds with velocity -2V relative to the basketball, which is itself moving upwards at velocity -V, so the tennis ball moves upwards at -3V relative to the ground. Since the height attained goes as the square of the velocity (kinetic energy going like velocity squared and potential energy change due to gravity being linear in the distance ascended) the tennis ball travels nine times higher.
:-).
I've also done this demo with three balls stacked on each other. It's much harder to get them all aligned, but when it works, the topmost ball goes (optimally) forty nine times higher than when bounced alone.
Note that the momentum conservation equations that give the perfect reversal of relative velocity assume that one object in the collision is much more massive than the other (i.e. basketball versus earth and tennis ball versus basketball). In this limit, the velocity of the more massive object is essentially unchanged by the collision.
Once, for fun, I calculated that if you extended the stack of balls to something like 20 that the topmost ball would attain orbital velocity
Curtains for windows?
Start a strip of magnesium burning, then place it into a hollowed out piece of dry ice, and cover.
Not only does the magnesium it keep burning it does so with a violent blue flame.
Making gun cotton (or nitrocellulose) is fun. We did in in organic chem lab when I was in college. IIRC, we mixed equal parts concentrated sulfuric acid + nitric acid, then stired in some cotton. Then we rinsed the cotton and let it dry. Our TAs discreetly suggested that we make some extra stuff, then put it in an empty pringles can (its foil-lined) and drop a match down it. Poof - instant flame thrower!
At http://www.wiley.com/legacy/college/phy/halliday32 0005/pdf/leidenfrost_essay.pdf at the end.
"I have long argued that degree-granting programs should employ ''fire-walking'' as a last exam. The chairperson of the program should wait on the far side of a bed of red-hot coals while a degree candidate is forced to walk over the coals. If the candidate's belief in physics is strong
enough that the feet are left undamaged, the chairperson hands the candidate a graduation certificate. The test would be more revealing than traditional final exams."
I'm all for it! This will show whether they really believe in the scientific method in their guts.
(Fortunately I completed my undergrad in May)
The only reason all cover-ups appear to fail is that you never hear about the ones that succeed.
The boiling-in-paper-cup was my thought, as well. Never had a problem with wax-coated Dixie cups, other than possibly-flammable drippage. (I'd be more worried about the thin plastic coat they put on the 'plain' ones.)
This one really mystified me when I was 6 or so and got my first chemistry set. I'd say that *allowing* the cup to burn illustrates the point- when you see the rim torch down to the waterline like a burning ship, you understand exactly what's going on- "Oh, duh, Dixie cups aren't magic, it's the water, stupid!"
Don't underestimate the ability of *someone* viewing your demo to go down the wrong track in understanding.
My favourite experiment was when my chemistry teacher was introducing us to liquid nitrogen. As he was talking he had a large thermos of the stuff sitting on the table. He put on his lab gloves as he was talking, and then put his had into the thermos with his first finger dipped into the nitrogen. When he got the part where he was explaining how objects soaked in nitrogen turn brittle, he pulled his hand out of the thermos, and smacked his first finger against the edge of the counter. The collective gasp from the students when his finger shattered was followed by total silence (or was there some screaming too?). What he has done is "loaded" the glove with a piece of sausage in the finger of the glove - when he had his hand in the nitrogen, it was safely curled up in a fist! Needless to say, the demonstration was effective, and we were all very carefull when handling liquid nitrogen.
What you are looking for is a discrepant event. There are plenty of archives of neat (and safe) discrepant events on the net, just hit a search engine.
One demo thing technically inclined students enjoy is how simple it is to build a simple radio. All you need is a coil and a capacitor which serve as the tuning circuit and a diod which removes the carrying frequency. Well, and of course a small earphone
When I was in elementary school I did my science fair project on the Leidenfrost phenomenon. I believe it can also be known as the Sessile Effect. With the help of my physicist father, I ruined a number of Mom's frying pans by heating them up far too hot while experimenting. For the age I think was pretty good and I got to the state science fair.
The best part was just watching those little droplets of water dance around. Nature is just so cool.
The worst part was not having a real thermocouple and having to fashion one out of an old oven themometer dial.
Dissolve some litmus in a slightly salty water and soak a napkin in it. The connect two wires to a 9V battery and stick the other ends into the napkin. A big red blotch will start forming around one of the electrodes.
OK, when I was in maybe 10th grade, I went to some sort of statewide science symposium. Of course, the first night, we had a professor give a talk that included a lot of exactly these sorts of graphic examples of chemistry and physics for entertainment.
The big show stopper at the end of his lecture was amazing. There was some sort of chemical reaction - I have no memory of the reaction whatsoever, but he went through it fully on the blackboard beforehand. It had a metal reaction chamber, manufactured such that it made a quiet whistle as the reaction went on - must have been the evolution of gases. Perhaps there was some sort of glow or light as well. He asked that everybody (hundreds of us in the lecture hall) be very quiet, and they turned off the lights as well. At first not much happened, then it started to whistle, and got quieter and quieter. Everybody is sitting in suspense - you could hear a pin drop other than the whistle.
When the whistle was almost inaudible (which meant that the reaction had run to completion) there was some other combination that occurred. With the result of an incredibly, mind-shatteringly loud and unexpected BANG accompanied by a powerful flash of light. I clearly remember seeing the professor's grinning face in the flash.
Whatever it was, it was great. Didn't convince me to be a chemist, but surely made me think about it.
Anybody know what this was? It seems like this might have been something that was separating hydrogen and oxygen from water, then explosively recombining. Or perhaps it was something about activation energy - the original solution decomposes into stable components until the original material isn't present anymore, then the temp climbs and kapow!
David Fung
You are much too mature to be reading such filfth!
One of my favorite experiments is to put about 1/4 cup of water in a gallon gas can (the metal kind). Heat it on a stove, burner, etc. until it starts boiling, let it boil a minute or so (until the water vapor pushes out enough of the good ol' ordinary air), then cap it, and drop the whole thing in a tub of cold water. Assuming the cans are still as thin, the can should appear to crush itself, as the water vapor recondenses into 1/1700th (or something like that) of its volume.
Back issues of Phrack have some good explosives info.
Phrack
For example, this.
The roots of education are bitter, but the fruit is sweet.
--Aristotle
By shining a strobe lamp in the darkness onto a fan and varying the strobe frequency you can make it appear to smoothly stop rotating or even make it rotate backwards!
boil a kettle of liquid nitrogen set atop a block if dry ice
do a color changing chemical reaction with liquids (we had one go oscillate between blue and yellow)
the candle in the inverted jar experiment, set atop a dish of water (shows a vacuum, and that fire needs oxygen)
sprinkle pepper onto a bowl of water, then rub some dish soap on your fingertip, and then touch the water and watch the pepper magically scatter (shows surface tension)
Place two identical tuning forks close by. Hit one and it will start humming. Then silence it with your hand and you'll notice that the one you did not touch is humming too (because of the resonance)
I came up with this one for my high school chemestry teacher while I was the TA for the class. I'm sure you know the one about the light bulb with the two terminals you lower into water. Plain water - no light. Salted water - light. Add a common ordinary flasher button under the light bulb and you get a FLASHING LIGHT. Then ask the class to explain it. This will DEFINATELY stretch their minds and you'll get answers like "Well, it's alternating current..." and such. After everybody who has given ANY opinion gets bonus points you reveal the trick and the entire class gains wisdom.
It's best to set this one up beforehand.
Get one of those large filter flasks with the side spout that is below the top of the glass. Attach some tubing to the spout and let it hang down. Fill the flask almost all the way up with water.
Then stick a funnel into the top and cover it all with a box. Pour a small bit of water into the top to brim up the water level and a siphon effect will drain the whole flask.
Little input, large output. Not as good as boiling lead, but easy to do with common lab-gear. You could involve the kids too. Have them draw what they think is in the box, etc.
Take a 2 liter empty pop bottle (plastic!). Drill a 1/4 inch hole in the cap. Pour about a spoonful of alcohol (eg rubbing alcohol -- it has to be concentrated enough to burn) into the bottle, swirl around, and dump out the excess. Put the cap (with hole) on the bottle and carefully hold a flame to the hole.
If you get the fuel-air mixture right (this may take some practise) the rocket will launch itself a good 10 feet or so vertically, maybe 20 or 30 foot range if launched at an angle.
I've never seen one of these burst (those bottles ought to hold over 100 psi), but you never know -- you might have a defective bottle. And you are playing with fire. Beware bursting and fire hazards.
(Or, in the words of the motto of the Denver Mad Scientists Club, "sumus scientes, noli hic domi temptare" (we're scientists, don't try this at home).)
-- Alastair
Helium will raise your voice drastically. Most of us know this.
There is another gas, if I recall correctly, sulfur hexafluoride, if I recall correctly, which will drastically lower your voice. Of course, the gas in question is heavier then air, so to get it out of your lungs afterwords, you have to stand on your head. Was a crowd pleaser last time I checked. (Double check that gas before trying, btw, this was 10 years ago, my memory could be foggy)
Feynman, in one of his popular biography-like-books, discusses a similar trick with flaming benzene on the hands, protected by a thin layer of boiling. I don't recall whether it's truly film boiling that protects the hands, but his failure is forgetting about surface hair first...
Take a coil connect its two ends to a small (3V) light bulb. Take a second coil and run AC current through it. As you move the first coil closer towards the second the light bulb will light up and gradually become brighter
The slashdot effect
Before slashdot..........after slashdot
Table-ized A.I.
It might open one or two students' minds to some of the notions of finite math and calculus, which would be a bonus. Plenty of opportunities to use a simple spreadsheet model to calculate the kinetic energy from the final stage.
Most students would benefit from a practical analysis of Newton's Laws of Motion, and this is an excellent opportunity to relate mathematics to the visceral impact of ball bearings shooting through 2x4's.
Don't forget to film it for later analysis and instant replays, as you probably don't want to be shooting high-velocity projectiles in close proximity to the students very often.
Back in the 1980's, when I was a Physics grad student at Rensselaer Polytechnic Instutute in Troy, NY, there was a tradition of putting on physics "Magic Shows" for the freshman classes. A few dramatic classics included these:
Make liquid oxygen by passing air through a coil of copper tubing immersed in a bath of liquid nitrogen (oxygen boils at a higher temperature than nitrogen). Great care is needed in working with LOX, it makes the damnest things catch fire!!!
Dip a cotton ball on the end of the proverbial 10 foot pole into liquid oxygen, wave it over a safely-distant flame, and create a BIG orange fireball.
Demonstrate that liquid oxygen is paramagnetic (weakly attracted to magnetic fields) by taking a BIG electromagnet with a small gap, placing a small test tube of LOX below the gap, firing a high DC current through the magnet, and video-watching the LOX being sucked up into the magnet gap.
With thanks to the late Professor Harry Meiners, otherwise a difficult person to work with, but a great showman...
"My strength is as the strength of ten men, for I am wired to the eyeballs on espresso."
http://www.inchem.com.ph/hcl.htm
Go read and learn about hydrochloric acid. You sure as fuck cannot buy it at "any pool store" I'm really sick of the kids getting on daddies computer and you mods eat it up like caviar.
measure it just right and you'll get a nice bar of soap.
I've always been impressed by clock reactions. This time of year, if you can get an orange/black one going for halloween it would be perfect:
p us_a/woodlandm/Demo1.html
http://www.mun.ca/educ/ed4361/virtual_academy/cam
then quickly pull it out. a pocket of gas is insulation for your hand for a few short seconds. some pro's can even put LN2 in their mouth. don't swallow it though. the 20000 to 1 volumetric expansion when LN2 turns to gas won't be pretty.
1) Take a newer U.S. Penny, make a small notch on the edge of it with a blade, place in sulfuric acid. (Newer penny's are made of zinc, plated with copper... after about 10 or 15 minutes, the result is a paper-thin shell of copper shaped like a penny, almost like tin-foil.)
2) Get an empty #10 can with a plastic lid (such as a coffee can). Punch a hole in the side, about 1/3 to half way up - the hole should be just big enough to fit in the end of a rubber hose (such as a bunson-burner hose). Pack some ordinary all-purpose flour into the hose. Stick the end of the hose in (about 18-24 inches long - with the flower at the end in the can), and seal around it. Place a burning candle into the can. Demonstrate that you cannot ignite a pile of flower, then place the lid on the can, and blow on the hose - BOOM!
Rig a pump, a rubber bucket/tub, use some springler tubing (some of which you want to saw in half to make the upward sloping ramp. Pump water up, let it slide down and the kinetic energy carries it up a noticeable sloping half-pipe back into the tub. Simple, interesting.
Often wrong but never in doubt.
I am Jack9.
Everyone knows me.
I'm surprised that no-one has mentioned the glycerine/potassium permanganate trick yet. See it here
This is *not* a hands-on demonstration. keep the kids well back and wear goggles.
Draw some tap water into a large beaker with some ice cubes, take a
big sip, then stick it under a glass dome and crank down the pressure
until you can get it to a nice rolling boil without melting the ice.
You can impress people of all ages with that one. The trouble will
be in convincing them it's science, as opposed to magic.
Cut that out, or I will ship you to Norilsk in a box.
My favorite is creating a plasma ball in a microwave. First light match and put it under a large round glass container (make sure there is ventilation on the bottom so the fire doesn't go out) put inside of microwave, close door, turn it on and watch the fun!
My personal experiment was a variation of the "Shoot the Monkey" experiment showing the priciples of gravity.
You all have probably seen this one, but here's how it goes. On one side of the room you have a projectile and a way to fire it (gun, blowgun, dartgun, etc...), and on the other side there is a stuffed monkey (bottle, etc...). When the projectile is launched, the monkey falls, and pegs the monkey. Little kids will think that the monkey will dodge the bullet, but it won't, gravity works the same on all bodies.
Anyways, that's my favorite. Quite possibly my second favorite experiment was when my teacher taped a mirror onto the woofer of a speaker and then shone a laser on it. The light reflected off of the mirror and made a neat pattern on the ceiling.
Well, those are my two favorites that I've seen, but I bet you that there are about a million and three that I haven't mentioned. Have fun!
When I was a little child in grammer school .25 gallons of
we conducted this experiment:
Fill a clean 1 gallon gas can with
water.DO NOT put the cap on yet. Place on stove and bring water to a boil.
With oven mittens, take the can off the stove, and
place in the sink. With oven mittens again, screw
the cap on. Pour cool water on the
can in the sink.
You have now proved the existence of atmospheric
pressure. As a child I remember being startled at this unexpected result.
We first lit some candles in small aluminum candle holders (cupcake baking foils) and watched the candle get smaller as it burned and saw the light coming out coming and felt the heat. So I formulated the hypothesis that wax must have a substance in it that is given off as heat when it burns. The candle gets smaller, the heat and light come off. Obvious.
So I suggested that we capture this stuff, lets call it phlogisten, a name I suggested that Priestley had used for the substance.
We could catch it in a jar by putting the candle in a the aluminum cupcake holders, floating the foil in water in a saucepan and putting a jar over it. As the phlogisten came out of the candle it would go into the air pushing the water down and so we could measure how much was given off.
Nice scientific experiment. Obvious hypthosesis, easy and cheap experiment, expected result. If you know the actual result, you have a wonderful way to show that one needs experiments as well as theory to further science.
You used to be able to buy muriatic acid at a pool store. I don't remember the molarity, but it was pretty strong stuff. Enough to affect the pH in a pool (with just one bottle), at least.
One summer I used many bottles of pool-store-bought muriatic acid to etch away at a long, long driveway in preparation to retreat it with a paint. I actually went through a few brooms which basically fizzled away in the process.
I don't know how much I believe the melting down of a stop sign pole but it would definitely burn a lawn.
As my father lik@(munch munch)...
DC current applied backwards to a capacator makes it explode.
Although that's not really surprinsing to most people, as most people have no idea what a capacator is.
George II -- Spreading Freedom and American values, one bomb at a time.
I still remember this demonstration from the Museum of Science and Industry when I was about 8 years old...
It was a large box with pegs, and a hole at the center, top. The balls would fall through the hole, down the pages, and land into slots at the bottom. On the front glass was a bell curve painted on the glass.
I watched in amazement as time after time, the balls would fall into the shape of the bell curve, even though they were falling randomly.
Sometimes it's best to just let stupid people be stupid.
My neighbors are doing a "Science Can Be Fun" demo for some schoolkids (they work at NCAR in Boulder) and the project for this year is making french fries.
PVC pipes and fittings (including a large-handled valve for a trigger) are all available from the hardware store. The racquet was a few bucks at a thrift store, and they plan to spray fries (raw, but still) over the heads of the kids.
The lesson is simple -- stay in school and someday you'll get paid to make projectile weapons in your garage.
Or maybe it's PV=nRT. I forget.
One of my favorites (that hasn't been mentioned already, AFAIK):
:)
Get a beaker of Hydrochloric Acid and a beaker of Sodium Hydroxide. Using a dropper, show how caustic they are on various substances. Then, without warning, pour some of each into a new beaker and take a drink.
Of course, there's nothing wrong with drinking warm salty water.
This would be best for 7th or 8th graders and above, or anyone who has done science on angles of reflection. You go through the whole spiel and then as a demonstration you show how it works by using water and a laser beam.
Step 1) Find a laser that you can use for this demonstration.
Step 2) Shine the laser beam through the bottom of an empty two liter bottle. Mark it and burn a hole through the bottle one side. (One hole in the bottle not two)
Step 3) Cover the hole, fill with water, cap the bottle, remove plug.
Step 4) Shine laser beam so it passes through the bottle, then the water, and then the hole. Uncap the bottle.
The laser beam should follow the stream of water from bottle. So there it is, a simple demonstration of total internal reflection like in a fiber optic cable.
I/O, I/O, its off to disk I go, with a read and a write, and a bit and a byte, I/O, I/O, I/O, I/O
Of course, after it's been boiling intensively for a minute,
turn off your vacuum pump and let the pressure back in, and
immediately take the dome off and pick up the beaker and
drink some more of the water.
Cut that out, or I will ship you to Norilsk in a box.
I have a friend that demo'd this to some students- they stirred the mixture with a glass rod- unfortunately the shear increase was far greater than they expected (even during their tests for some reason) and the rod snapped into 3 pieces- 2 of which lacerated and punctured her hand quite severely.
Be careful on ANY demonstration that you have not rehearesed completely, and, as corny as this sounds (no pun intended), hold a 'review' session with your peers to make sure you have considered all things that could go wrong.
Fill a balloon with propane. light it... Note that you don't get an explosion... just a fireball.. Burns at the interface of air/propane. Fill second balloon with oxygen/air. Add propane... Do the same thing (I forget the proportions... I think it's 1 Oxygen to 2 propane). Note an actual EXPLOSION because gasses are pre-mixed. This is a good intro to the mathematics of explosives (and things like why car gas tanks don't usually explode like in the movies)
Free Software: Like love, it grows best when given away.
(or, for the extreme crowd, demonstrating the Leidenfrost effect by sticking one's hand into a vat of molten lead [PDF])
You could top that by chopping off your head and blinking your eyes.
Not only does it recursively open as many windows as possible, but my virus scanner reported a virus.
Can a moderator edit out that link?
> Would this be possible with a damp finger and standard french
> fry grease heated to 350 F?
Don't do this. Your finger might be fine, but you could get some
nasty burns in random other locations as the grease splatters.
Cut that out, or I will ship you to Norilsk in a box.
How about paper towel inside a plastic cup. Invert, and submerse in water.
It'll make the younger crowd ooh, and ahh. It may even give the older ones something to think about.
-Ben
I second this idea. Here's a links to a cheap but good kit. There are some other kits available too, google away.
This is a thoroughly spectacular demonstration of many physical and chemical properties and concepts.
Make a dry mix of pulverised Aluminium and Iodine.
Then pour a small cone of the mix onto a fireproof base (my chem teacher used an asbestos sheet, but I'm not sure if asbestos is used in schools any longer). Make a small well in the top of the cone. The mixture is stable, right?
Well, watch what happens to the mixture when you put a single drop of water in the well. You get a plume of purple smoke and a handful of sparks.
The real question to ask the kids is "Why didn't the reaction begin until the water was added?".
IIRC, it goes something like this:
When Iodine dissolves in water, some of it hydrolyses into an acid (hydroiodic?) which reduces the oxide film on some the aluminium, leaving bare elemental Aluminium in contact with water, oxidising it. The heat from the water oxidising the Aluminium sublimes the Iodine, creating the purple plumes and melts more Aluminium leaving bare Aluminium in contact with oxygen in the air, starting the main reaction.
You might want to use a fume hood, though, gaseous Iodine is a little unpleasant.
Ahh - My eye!
The doctor said I'm not supposed to get Slashdot in it!
Got a power supply and some salty water? Electrolysis is a great experiment. Fill a 2 liter soda bottle with Hydrogen, and have one of the students light a match under it. BOOM... great experiment with great results :)
I'm not very good with chemistry but here's two that I thought were neat.
1) Fill fish tank with water.
2) Put rosen on the surface of the tank.
3) Put hand in the tank.
4) Observe that as you pull your hand out of the water it's totally dry.
1) Fill glass with ice.
2) Fill same glass the rest of the way with water.
3) Observe that the ice is sticking above the rim of the glass and the water is up to the very rim.
4) As ice melts, the water level doesn't change *at all*. The amount that the ice sticks out is equal to the the amount that water expanded as it turned to ice.
Vanguard
That which does not kill me only makes me whinier
Induction.
You can induce the electrical current in any conductive object (metals lend themselves to this nicely) by applying alternating magnetic fields, thus causing a normaly non-magnetic metal to become magnetic. If you had a strong enough magnetic field, you could induce pretty much any material. As an aside, Al works great as railgun slug. It works even better if the core is something stong and resistant to heat, such as ceramic composites. There's nothing quite like lobbing small ammounts of molten Al at insane velocities.
You know, you would not believe the ammount of people who think that Al is not electrically conductive, and have Al wiring in their houses... *laughs*
What's happening is that the helium has much lower viscosity than air and as a result your vocal cords vibrate at much higher frequencies.
You can demonstrate this easily and cheaply. For kids of the appropriate age, you can provide enough balloons that they can all try it themselves. Much fun.
A couple tricks you can do with a gallon bottle (like apple cider often comes in)
:-)
Get a peeled, hard-boiled egg. Take a scrap of paper, light it on fire, and drop it in the jug. While it's still burning set the egg on the opening of the bottle. After a bit, the paper will burn out, and shortly thereafter the egg will be sucked into the bottle, as the air inside cools and shrinks.
Equally good is the trick of getting the egg back out again. Tip the bottle upside down so the egg comes to rest in the neck of the bottle. Put the bottle to your mouth and blow into it, hard. As soon as you take your mouth away the egg should pop right out. Careful, or you'll get a mouthful of sooty egg
A second trick. You'll need a small piece of window screen, cut a bit larger than the bottle's mouth. It needs to be screen with pretty small holes. Make sure both the bottle and the screen are scrupulously clean- any bit of soap on anything will break surface tension and get you very wet.
Now, fill the bottle clear to the brim with water, and set the screen over the top. Hold it in place, and flip the bottle. You should be able to take your hand away and the screen will stay in place, and the water will stay in the bottle. This is a very impressive demonstration of both surface tension and air pressure.
(explanation: the air can't go through the holes because the surface tension of the water across the hole is high enough to prevent a bubble from forming; thus the water can't leak out)
Steam crushing a can-
Hold a soda can with a little water in it in some tongs. Heat it up over a bunsen burner or similar so the can is full of steam. Then place it mouth end down in a plate of water. The temperatre will drop, and PV=nRT will crush the can in a fraction of a second.
Barbells and an office chair.
Not too difficult- sit in the chair, hold the barbells (or even just your arms and legs out), get them to spin you up, then pull the weight in to increase angular velocity. Just don't puke.
Baloon in a car
You'll probably have to videotape this unless you can fit everyone in a vehicle with good acceleration and cornering. Anyways, get a helium baloon, hold it in the most spacious area of the car, and subject the car to acceleration. Floor it, hit the breaks, take some corners at speed. Maybe some steep climbs or drops if you're adventurous. (Don't try this on a busy street). When you're getting pressed back into your seat as the car speeds up, the baloon is going forward. When you take a hard right and get pressed up against the door on your left, the baloon leans right. Basically, it's 'anti-acceleration' in the same way that it's 'anty-gravity'.
When my physics prof asked the class to think about this and tell him what the baloon would do, the only person to get it right was my friend who was being a jackass and trying to give the obviously wrong answer.
Well, point is, supposing this story was real, is this the same sort of thing? What's it all about?
Be careful! New moon tonight.
You haven't lived till you created plasma balls by shorting an AT power supply that was between your legs at the time. (this wasn't the intended goal)
The Coolest Physiscs Experiment that I have ever seen is as follows.
You'll need the following:
1) An old oildrum or other large steel drum that has a tight sealing lid.
2) A large CO2 filled fire extinguisher
3) 2 gallons of boiling water
4) A Ballpean hammer
5) Spectators
Here's how to do it:
1) Place the drum outside in a field or a nice clearing.
2) Boil the water (rolling boil)
3) Pour the boiling water into the drum, set the lid on loosly, wait about 45 seconds and then seal the lid.
4) Start hosing down the drum throughly with the fire extinguisher.
5) when you've expended the entire fire extingusher take the ballpean hammer and give the side of the drum a good whack.
6) Jump Back
If your drum seals well it should with an awesome whooshing sounds just collapse and flatten out. You pbly should have the kids stand back a bit and definitly need to waer safety glasses and overalls (scalding water flys if you do it wrong). Very impressive and tons of fun!
Rule of Life Number 2: Remember, it can all go to hell at any minute. --Jimmy Buffet
Take a strong glass tube with one open end, about 12" long and 1/4" inside diameter. Place a small piece of cotton ball in the tube. Press a plunger with a 1/4" rubber stopper on the end into the tube, hard. When the air pressure gets high enough, enough heat is generated to spontaneously combust the cotton with a small flash (think diesel engine).
Don't dip your hand in lead.
Don't put liquid nitrogen or dry ice in your mouth.
[etc]
I think you've just written the script for "Jackass II".
A word for word recitation of Faraday's "The Chemical History of a Candle" lectures could be appropriate.
This is a great demonstration that really gets some oohs and aahs, and is very easy and relatively safe.
Equipment:
1. Lazy Susan Turntable (about 12" diameter)
2. Cereal Bowl
3. Ordinary Barbeque Lighter Fluid
4. Window Screen Netting
5. Match
Take the Screen, roll it into a cylinder that will stand upright on the lazy susan, making a cage. Staples work just fine to make the cylinder.
Fill the bottom of a bowl with some lighter fluid. Drop a lit match into the bottom, and it will catch on fire. It's a good idea to use a little fluid at first, then work your way up to get the right sized tornado.
Put the bowl in the center of the lazy susan, place the screen cylinder around the bowl (you might have to fasten it to the turntable with a couple of pieces of tape.
SPIN the lazy susan slowly, and watch a pillar of flame rise up inside the screen!!!
This creates a flame tornado that extends to the top of the screening!
Convection and combustion are the two basic principles taught here. By spinning the tube, you increase the rate of evaporation of the lighter fluid, and improve the air:fuel mix, which burns hotter and higher than with just the bowl alone.
I did this demo with a group of 5th graders at our local elementary school, and they loved it. Definitely add a disclaimer to this one... don't want the kids burning down the house. And keep a fire extinguisher handy just to be extra safe.
If you really want to go over the top, use an old record player instead of the lazy susan, and gradually step up the speed... cool effect.
Here's one I saw in a college physics class a long time ago. I believe the scientific point was gravity's effect on the trajectory of a projectile. I seem to recall it was also an anecdotal reason why squirrels don't dive off a tree branch when they hear a gunshot.
A small metal hoop with a cloth bag attached was suspended from an electromagnet several feet in the air at one end of a stage. At the other end of the stage was a blowgun with a ball in it. At the end of the blowgun was a sensor -- triggered by the ball exiting the barrel -- which would cut off the electricity to the electromagnet holding the metal basket. IIRC, the blowgun was aimed directly at the center of the metal hoop.
The prof would blow through the blowgun, the hoop would drop, and the ball would end up inside the basket. Worked every time.
The wierdest thing was that you couldn't see the ball in flight.
Atttach a nozzle on the OUTPUT of a vacuum cleaner so it aims Upwards into the Air at a 45 degree angle, place a BEACH-BALL in the stream of out-blowing air about a foot away, and Watch It Just SUSPEND there - since the air moving around the ball creates LIFT enough to keep it up.
;-)
sorry about the AC post, but i'm away from my CPU, and forgot my password (having to remember umpteen gazillion passwords is a #%# pain!), so here's a URL to my site (which means its not actually an 'anonymous' post anymore...
best regards,
john
True story, and an occasion to remember for any students present should you repeat this demonstration.
... but when it's right in front of you, i'm sure it would *seem* a lot like 30 feet). At the end of this demonstration, the first five rows of bleachers had been completely cleared (into the next few rows). The first few rows remained empty for the rest of the term.
A friend of mine walked into the first lecture of his chemistry class. This particular lecture series was being held in the gymnasium of the college, with the students piled in on the bleachers down towards one end of the gym, where a small table had been set up. This tabled contained a small bunsen burner and three empty-looking 2-liter soda bottles, with their caps screwed on. As the students settled into place, the professor walked into the room, and quietly lit the bunsen burner. He then proceeded to unscrew the cap from one of the bottles, carefully placing his thumb over the opening. He turned to the class, and with no further introduction stated, simply: "This bottle contains hydrogen. It burns readily." He then took his thumb off the end of the bottle and quickly touched off the stream of pressurized gasses on the burner, and *FWOOM*. A flame somewhere on the order of 30 feet long shot out of the bottle. (or so I'm told
09
Use liquids with different density that doesn't
mix, like vegetable oil and water. Use food
coloring for better effect. When the kids have
seen that the oil floats on top of the water, pour
some salt into the glass... it will bring parts of
the oil to the bottom.
Here at the UIUC a group called Physics Van always puts a chunk of dry ice in a 2-liter bottle with a little water. Then then put that in a big plastic trash can. When the CO2 causes the 2-litre bottle to pop, the trash can lid goes flying in the air. Always a croud pleaser!
One of the coolest experiments I saw with optics involved either a big glass "beer" mug or a glass coke bottle. You fill the mug or bottle with coke or anything dark and show how it looks full. You then put the bottle/mug in a fish tank and you can see how thick the glass is because the light does not bend as much when it goes from glass to water. Very interesting. For a permanent display you can incase a coke bottle in Acrylic or something like that.
One thing my physics teacher did was to hang a rod sideways from the high ceiling of a gym by the ribbon from a cassette tape. On the rod he hung 2 garbage bags full of crumpled newspapers. Students would walk towards the bags and the gravity principles would take over and the bags would be attracted to the students. Was a good demonstration of how gravity works between 2 bodies
And then there's always the good ol' fashioned shatter stuff with liquid nitrogen. Always a crowd pleaser. One demonstration I saw at a science museum was freezing beer vs. vodka (low vs. high alcohol content) and observing how long it took, since alcohol has a lower freezing point then water
There are only 10 kinds of people in this world... those who understand binary and those who don't
get a length of copper tube from home depot, the thicker the better. I got a length of tube and then some repair coupling to put over it, to make the tube thicker. then drop a strong magnet down the tube. It will float slowly down instead of falling at a normal rate. here's a page describing a simmilar experiment.. you can get great magnets from wondermagnet. (the spherical ones work best.)
Another fun thing: get two linear polarizers and then show that they are transparent when lined up but opaque when crossed. This is pretty cool if you haven't seen it before. You can get nice big ones from edmund optics.
Also you can get 1/2 wave retarder film from this same place; put the retarder film between the crossed polarizers, and it opens up a little "window" which allows you to see through the otherwise opaque polarizers.
Other stuff you can do with polarizers: look at a window and observe that the glare on the window is dimmer when you turn the polarizer the right way. Also cross two polarizers and put a piece of clear plastic (like a CD case) between them, and you can see all sorts of pretty colors. Also you can take a clear plastic bag and stretch it and put it between the two polarizers, and the colors will indicate the stresses in the bag.
1) Get concentrated Ammonium Hydroxide and mix it with Iodine crystals. Decant the solution and wash the pasty precipitate in water. WARNING: KEEP THE PRECIPITATE WET! (if it gets in the sink, wash it down the drain with profuse water, i.e. leave the faucet running for a long time)
2) Set up a ring stand in the corner of the room with a piece of paper taped across the room. Sometimes I put three rings with filter paper taped on them. Apply a thin layer of the paste onto the paper right before you begin your show.
3) Avoid going anywhere near the ring stand. I mean no movement within a few meters if you can spare. Launch into your show and give your explosive ample time to dry.
4) Get a long stick and tape a feather to the end.
5) Give a talk about explosives and how they make our life easier for engineers, etc. Take the feather-stick and lightly brush the contact exlposive.
6) BAMN! And I do mean BAMN!
note: do not use this for pranks, it's too sensitive for transport
News for nerds, stuff that craters!!
Get it!? Weee I'm funny!
My science teacher in high school did this one that I really liked:
Heat up an empty pop can over boiling water (using tongs of some sort), right side up. Then, quickly turn it upside down and plunge it into an icewater bath. It will implode with a small pop and end up almost as small as if you had stomped on it to crush it for recycling.
Don't steal. The government hates competition.
Nothing was more surprising than our surprise demo on capacitors, where a 10,000 volt capacitor was charged by the prof and discharged onto an arc of aluminum foil. Boom.
-Sean
My high school physics teacher, once we got to the section on Newton's laws, did this every year...for real:
First he would take out a large 'Bed of Nails', a body length piece of wood with nails evenly spaced out over the wood with the pointy-sides faced upwards, and lay down on it. Then he would take another, smaller piece of wood with nails driven into it and put it on his chest, with the pointy-sides facing his chest. Then another teacher would come into the room, bringing in a **CINDER BLOCK** and put it directly on top of the nail-laden wood on top of the physics teacher's chest. Then the assistant would pull out a _Sledgehammer_ and give the cinderblock a hit with full force.
The cinderblock breaks, the physics teacher survives, and his shirt is only slightly imprinted with a grid of pointy impressions. The force of the sledgehammer's impact is completely absorbed by the cinderblock and not the teacher's body. If the cinderblock did NOT break, the teacher would receive a hundred holes in his body.
He did this every year and never received a wound. Amazing, really.
Salis
Favorite
other memorable demonstrations from 9th grade science class:
:) We tasted successively stronger acids until we got to hydrocloric acid, as I recall. I just got a slight whiff of that one, not a real good taste.
:)
put a feather in a vacuum chamber and watch it fall as fast as a rock.
fill a mason jar with pure oxygen, light a piece of steel wool (which will have a very feeble red glow where you lit it, if anything) and then put it in the pure oxygen. It lights up real good.
fill a mason jar with pure hydrogen and then open the jar and light it up. It just makes a big bang if memory serves.
(there are probably safety considerations with the last two which I'm forgetting.)
Someone already mentioned the gas can filled with boiling water which you seal and then cool it down to cause the gas can to be crushed by atmospheric pressure. That was another good one, from high school chemistry.
Also in high school chemistry we had an "acid tasting experiment" which I don't recommend you try.
There are a lot of good little science toys, I mean demonstrations, at Scientifics Online. The van de graaf generator is cool, of course. There is also a magnetic levitator which is very cool, but its scientific value is unclear.
Any experiment involving gases can be turned into an experiment involving bubbles and gases. They form a nice visible barrier. Just put the gas-creating reation into a container with a small-ish neck, and cover this with a thin film of detergent.
Fill bubbles with H2 for nicely concentrated explosions.
Create smoke filled bubbles.
Blow bubbles over a tub of dry ice and water, and they `float' over the tub (the high density of the CO2 keeps them there).
Demonstrates both the properties of gases, and surface tension.
"I think it would be a good idea" Gandhi, on Western Civilisation
This one was shown me by my dad, a sometimes physics prof in his retirement, when he needed to show the principles of lift as he instructed high school youth on sailplanes (gliders):
All that's required is a solid wooden spool with a single hole, and a circular piece of construction or preferably card stock paper, about 10cm in diameter.
1) Ask the kids what will happen if you blow through the spool with the disk centered on the hole on the other side, flat side toward the spool hole. (they should expect it to be blown away when you take your hand off)
2) Place your index finger onto the paper over the hole in the spool, and put the other end of the spool to your mouth.
3) Blow into the spool very hard.
4) Take your finger off the paper. The paper should stay in place. When you stop, it will fall off.
This demonstrates that swiftly-moving air has lower pressure than stationary air--hence sucking the paper to the spool by blowing.
Drop a supermagnet Nicodium? whatever. onto a steel toed shoe. Then do it again but this time drop it down a copper pipe aimed at your steel toed shoe. (motor effect).Put a whole bunch of the magnets together and do it again. Bet the class how long it will take to hit your shoe first after they see you drop it without the pipe. Or almost the best demo I've ever seen get a piece of heavy steel round mill stock ringing. Like 2 or 3 inches in diameter and several feet long. Place on Styrofoam so that you can get it ringing then lift it up and point the small end at the class. Really cool. You can do full wave, half wave, three waves, depending on where you and how many Styrofoam blocks you got. To get it started to ring just tap it with somthing then rub it in one direction till it gets really loud. Pick it up in such a way that your hands are exactly where the blocks are supporting the rod or it will quickly stop ringing. Almost a pain weapon. It's cool.
Here's a cool (cold, actually) one: Buy 2 roughly 2lb blocks of dry ice. Scoop out a golf-ball sized hole in one of the blocks, and drop some magnesium shavings in. Ignite the shavings with a lighter/bunson burner/etc. Do not look directly at the burning Mg. It will hurt. But _do_ notice that it burns a bright white. Now put the second block of dry ice down on top of the first block so that it covers over your pit full of burning Mg strips. You'll notice that even though the Mg is now in an atmosphere of pure CO2, it continues to burn. And now it's a pretty (and much less painful) red color.
One of my favorites is the sodium acetate tower. It is a very safe demo that gets a good reaction out of just about any age group. You make a supersaturated solution of sodium acetate in a spotlessly clean beaker. Show everyone the clear liquid (looks like water) then start slowly pouring it on the table. Crystals of sodium acetate form as you pour, and the water is trapped within the crystals. You wind up with a pile of fairly dry looking sodium acetate and no liquid. Very impressive. Sodium Acetate Tower
Another one I like is the burning carbon disulfide demo. I've seen this done using a long glass tube full of carbon disulfide gas. Drop a glowing splint in one end of the tube, and as it falls you get an amazing blue flame. Here's a link (hope you speak a little German) CS2
They did it a bit differently. As you might guess, this lab is a bit more hazardous and you do get some stink from the sulfur. It's pretty though.
Making your own mirror is another great demo. You prepare a small batch of silvering solution. ISTR using silver nitrate and nitric acid, maybe using an aldehyde as a reducing agent. I'll try to link to a recipe. Anyway, you mix the solution in a round bottom flask and begin swiriling. It takes about a minute, but as you swirl a silver mirror plates out onto the glass. Tollens Mirror
I used a bit of a different procedure, but this looks like it should work. You may consider keeping the flasks a little on the warm side (100-120 F) just before you do the demo. I've gotten better results compared to using cold glassware.
A great set of books is Tested Chemical Demonstrations, Vol. 1-4, by B. Shakishiri (University of Wisconsin Press.)
This explains how some guy I saw on that Ripley's TV show poured molten lead into his mouth without burning the crap out of himself. It's been a while since I watched it but IIRC, he seemed to keep it in a pool on his tongue for a couple of seconds and then spit it out.
It's long been a running joke that people with Physics degrees end up in the Unemployment line. But now when you go to the fair and see a circus geek sticking his hand in molten lead, ask if he went to M.I.T. And the guy next to him that bites the heads off of chickens may have a PhD in Philosophy.
Imagine this. A great, inflated, green garbage bag
slowly wafting down from a tall building. It gains some speed as it nears the ground. People look up and say, "What the....?" The garbage bag hits! *BOOM!!!* It explodes in a thundering
fireball of green bits of plastic and flame!
"What is this?" you may ask. Well, this is the great "Acetylene Balloon Bomb." And here is how to make it.
Ingredients:
============
(1> For a small bomb: a plastic bag. Not too big. For something big(ger): a green, plastic garbage bag.
(2> Some "Fun-Snaps". A dozen should be more than enough.
(3> Some garbage bag twisties. String would also do.
(4> A few rocks. Not too heavy, but depends on size of bomb and desired velocity of balloon/bomb.
(5> PRIME INGREDIENT: Acetylene. This is what is used in acetylene torches. More on this substance later.
(6> One or more eager Anarchists.
Construction:
=============
(1> Fill up a bathtub with cold water. Make it VERY full.
(2> Now get put you garbage bag in the water and fill it with water. Make sure ALL air/oxygen is out of the bag before proceeding.
(3> Now take your acetylene source (I used it straight from the torch, and I recommend this way also.), and fill the bag up with acetylene.
(4> Now, being careful with the acetylene, take the bag out of the tub and tie the opening shut with the twisty or string. Let the balloon dry off now. (Put it in a safe place.)
(5> Okay. Now that it is dry and filled with acetlene, open it up and drop a few rocks in there. Also add some Fun-Snaps. The rocks will carry the balloon down, and the Fun-Snaps will spark upon impact, thus setting off the highly inflammable acetylene. *BABOOM!*
(6> Now put the twisty or string back on VERY tightly. You now have a delicate but powerful balloon bomb.
To use:
=======
Just drop off of a cliff, airplane, building, or whatever. It will hit the ground a explode in a fireball.
believe it or not, but you can dip your fingers in liquid nitrogen. i've done it, and i've seen others do it. hand comes out fine if you only do it for, like, 0.1sec....and obviously you'd be crazy to leave it in there longer than that.
watching dry ice skate across the floor is cool too. same principle applies in both cases...a layer of gas between the cold object and the warm one.
what else...color changing reactions are pretty cool. shake the bottle, bright red, shake it again, bright blue, etc.
- Make Nitrogen triiodide crystals and detonate them (the purple crystals explode when jarred)
- Electric pickle - make a pickle glow!
- Oobleck! Corn starch and water combine to make a substance you've got to handle to believe.
These are just a few, the sites I pointed at above have other similar projects. Have fun!"It is our blasphemy which has made us great, and will sustain us, and which the gods secretly admire in us." - Zelazny
Mix up a solution of water and soap in a tub. Run your favorite flammable gas through a flexible tube into the tub so that you get nice bubbles.
Now have a Bunsen burner set up a safe distance away (5-10ft). Gather a large set of bubbles into your hands and place in the flame of the burner. You will get a nice column of flame in your hands for 3-5 seconds and the wonders of the Leidenfrost effect will protect your hands...but not your beard, so make sure that you keep your hands away from your body.
This is a really fun and safe experiment...email me if you need more details or pictures!
A piece of plywood, a sheet of plastic (shower curtain), and the absolute cheapest electric leafblower you can find will slide a 200lb person all the way across the gym floor.
I believe I saw this accomplished at the science museum in chicago. Heat up the drum for a bit then drop in ice, should make it implode.
The University of Florida Physics Department has a similar site for demonstrations.
1 cup cornstarch
1 cup baking soda
3/4 cup water
N drops of food coloring
At least that's the way I have done it.
When men used to be men
You can't go wrong with a tesla coil!
:P ) was levetating a magnetic cube using a superconductor.... seeing that cube floating there almost felt like an illusion!
Huge sparks, loud noise, the intense smell of ozone. I remember the first time I saw a tesla coil in grade 6, a friend of mine's dad built hit a tesla coil for that years science fair. I gotta tell you, few science experiments have been more memorable for me. Most people are impressed when they're shown something that develops a potential 1000 kV!
Another interesting one, especially for maybe senior physics or 1st or 2nd year physics/engineering is showing a photoelastic material, you can really see how stress and strain as well as stress concentrations spread develop in a material.
The coolest experiement I ever did in 2nd year physics (it was an electricity and magnestism course, awful course by the way, I got a C+, my lowest mark ever
Oh, finally for a quick and fun effect (especially at the end of a 3 hour chem lab or something tedious like that) is pouring say a litre or two of liquid nitrogen on the ground, that gets people interested right away!
"Entropy is the bad-guy, and he is everywhere"
that same teacher showed us a kinda cool experiment herself. drain about 1/4 of the coke out of a 2-liter coke bottle, and drill a very small hole in its cap (the smaller, the better). next, take about a roll of mentos (the original kind, i think, test it out yourself), and place small holes through the center of each. now take some fishing wire and thread them through all the mentos in a line, and tie the ends with something heavy like steel nuts. make sure the mentos are tied together tight, and give a little extra fishing wire on one side. thread this extra fishing wire into the bottom of that coke cap with the hole in it, and screw the cap on the coke bottle, holding the fishing wire to make sure the mentos do not touch the coke inside. drop the wire to let the mentos drop into the coke, and move out of the way. some odd reaction takes place that causes the cap to shoot off and hit the ceiling, and pop spews close to 10 feet in the air. at least, thats what happened when my chem teacher did it. the janitor was pretty pissed that he had to clean the ceiling after that one.
alternately, you could just offer someone a coke while theyre eating several mentos :)
eh, you mean frozen oxygen?
Refer them to this site, or print off some choice pages and hand it out in class. Ask them what they think they should do about educating the public... etc.
Then you can show them this site.
After that, you can tell them that gullible is no longer in the dictionary. Hope that there aren't any who hesitate and look around before rolling their eyes and groaning.
-eg
Here's a colorful one:
:).
Try putting (about) equal volumes of CCl4 (carbon tetrachloride) and aqueous KI (potassium iodide) in a test tube together. The clear, non-polar CCl4 will sink to the bottom, and the clear, polar, KI solution will sit on top. Now add a few drops of Br2 (liquid elemental bromine) to the solution and shake. The top layer will turn orange and the bottom will turn pinkish purple, but stay totally separate.
This reaction happens because bromine is a stronger oxidizing agent than iodine. When the bromine is added, it replaces the iodine in solution, forcing it to become I2 (elemental iodine) which mixes with the CCl4 below and turns it pinkish purple. The extra leftover bromine turns the solution on top orange.
It may not be as exciting as blowing something up, but it illustrates an important scientific principle (relative strengths of oxidizing agents) and it still looks cool
That is if you like having an anvil on your chest...I've seen this done, but I'm not sure if you have to hold your breath or keep your chest expanded(likely). Very neat though, as it seems certain to the viewer that the person under the anvil must be crushed by the hammer blow.
What's in a Sig?
Keep in mind that each collision has to be such that the weight of the first object (i.e. tennis ball) is negligable compared to the second (basketball). Perhaps you'd be able to get it down to orbital velocity, but the size of the balls would be going down as well. I doubt that the last ball would be big enough to see with the naked eye, unless the first ball you started with was very, very, large.
Also, I am fairly certian that IF you couldn't get up to orbital velocity because you'd reach terminal velocity first (i.e. drag would be such a problem that there's no way anything would leave orbit).
Several hundred feet is probably a better target to shoot for with such an experiment (though that may fail, too).
There's a reason that the highest flying toys are rockets. They can get the highest the most.
Mod me down and I will become more powerful than you can possibly imagine!
Anyone else read that as "the classic two-shit experiment"?
is apparently pretty hard to find. Even McMaster-Carr (industrial supplier, with a huge variety) didn't have any.
Aluminum foil is another story.
These are all great. Here's one I havn't seen yet:
Boil a few ounces of water in a tin can so the can is full of steam. Then with tongs, invert the can into a bath of cold water. The can crushes itself instantly.
--Ben
The verb is "breathe"; please note the "e" on the end of the word. You don't "breath" air; you "breathe" it.
Enby in Waltham
...would be to put that capacitor on the rear of the naughtiest kid in the room... ;o)
You could do the old donut with a string tied around one side demo... when you swing the string + donut over your head you can talk about centripetal and centrifugal acceleration and ask the kids what will happen when the string cuts through the donut (it will go off in a tanget to the cirlce of your swing... this demonstrates orbits... if the force of gravity from the sun on the Earth were suddenly shut off, earth would fly straight ahead).
to illustrate the principal of a chain reaction (like what happens when a nuclear bomb goes off), an old professor of mine had a large plexiglass box filled with set moustraps. on the swing (the thing that kills mice) of each trap, there was a rubber cork (like the ones used in chemistry). One rubber cork is tossed into the box (which has a hole in it's top... but that's the only hole) and it sets off a trap sending it's cork flying. Those two corks set off two more and etc. etc. etc. pretty soon the whole box goes crazy (a chain reaction).
might as well get 'em started early. Make beer. If you need a demo, watching active fermentation is more exciting than a lava lamp!
If you have two modern high-flux magnets, sugar-cube size or bigger, PLEASE be careful not to get pinched between them! I was somewhat careless, and got trapped. It hurt, pretty badly, and I tried to pull free. BAD! As you pull yourself out from between them, the inverse-square law still holds.
The magnets don't know you are between them, and simply squeeze harder as the gap between them becomes smaller. Ultimately, the pressure is like that between the jaws of a pair of pliers with a strong hand gripping the handles, and I left a little piece of myself between the magnets; a little blood. (Healed completely; don't know why; I was lucky.)
What you have to do is live with the pain until you can force something between the magnets so they won't come any closer together. (No, not a piece of steel...)
Enby in Waltham
Step 1) Obtain a 55 gal. drum, with a small hole at the top.
... 55 gal. drum will more or less implode on itself instantaneously, crushed by the weight of the atmosphere. It will look like a truck hit it at 100 MPH. I've seen it before, its insane.
Step 2) Provide a large heat source.
Step 3) Place 55 gal. drum on heat source.
Step 4) Pour enough water into the drum so that it just covers the bottom, and creates steam.
Step 5) Allow the water to boil inside the drum. This will cause the vapor pressure inside the drum to change, and the atmospheric pressure inside the drum to drop dramatically.
Step 6) Spray 55 gallon drum with (preferably cold) water...for about 2-3 seconds.
Step 7) *WHAM*
Here, have 60 more ideas:
Becker demos
Bowie J. Poag
Increase the kinetic energy being transferred from the larger heavier balls by perhaps creating massive spheres of solid rubber and the top ball being small and of a much less dense material. You probably won't need all 20 balls.
Or Coca-cola.
Try to get a slug rejector (PC term is "acceptor") and see how it works. There's more interesting stuff in there.
Also, let a US dollar bill hang straight down; bring a strong magnet next to it, and see the magnet attract the magnetic ink. Do the same with an ordinary personal-account bank check, using the oddball MICR numbers along the bottom. (MICR = magnetic ink character recognition)
Some time back, US dimes, quarters, and 50-cent pieces were made of coin silver, a silver alloy. However, when the value of our currency dropped, the Ag in the coins was worth more than the denomination of the coin. Several 100,000,000 (?) slug rejectors had to be accommodated, and the sandwich coin, with Ni alloy faces and a Cu layer in the middle, was issued. (Interesting item is that the sandwich might be explosively clad, possibly by a subsidiary of T.I.).
For the unlucky, Ag is silver (from the Latin, argyrum, iirc), Ni is nickel, and Cu is copper (Latin cuprum, iirc. Two-letter symbols for chemical elements *always* are cap. for the first, lower-case for the second. Anything else looks as stupid as ".79" (79/100 of a cent).
nbodley[at}theworld[dot}com
Try to get a flat sheet of flashing copper, or something thicker; a thick sheet of aluminum is probably easier (and affordable :). Clean it off, and hold it at an angle. Put your magnet (a rod is not a good choice) at the upper edge, and let it slide down the plate. Takes a while...
Here's a good one. Take two gears, a foot of wire and some pvc pipe and affix them together so that all the energy from one gear transfers to the other, and vice versa. If you do it just right, you should have a crude but basically safe perpetual motion machine. Make sure to do it outdoors, preferably on a bed of gravel, so that the heat you generate does not cause a fire. You can use the surplus energy to run your computer lab and any other miscellaneous power needs for the next week or so, until the machine is consumed in a flash of excess heat. My girlfriend used it to reverse her polarity. However, the implementation can be kind of difficult. Warning: do not attempt in an atmosphere of pure hydrogen. Do not attempt with radioactive building materials. Do not, under any circumstances, attempt with midgets.
...that kids need to know. They do, or should, get kids interested, and that's good. However, I can see many important principles simply get to be ignored.
The demonstration at the equator, as shown on BBC, that demonstrates how the direction of rotation of water going down a drain reverses on account of moving a couple of hundred feet across the line was also amazing. But it was not genuine. It's bunko artists who are quite skilled. Lots of experiments like that one.
A torsion pendulum that can demonstrate the gravitational force from movable masses would also be a great demo.
How do you get people enthused about the actual process of science - coming up with hypotheses, figuring out how to test them, analysing the results, and so on?
Any sufficiently advanced technology is indistinguishable from a rigged demo
--Andy Finkel (J. Klass?)
The obvious liquid nitrogen ideas have been mentioned already. Try putting one end of a length of thick rubber tubing into the liquid nitrogen. Evaporating liquid at the bottom causes liquid above it to be propelled out the top of the tube. It makes a rather spectacular display as the liquid coming out rapidly evaporates. You can practice this first and aim it at unsuspecting audience members. They just get a chilly blast of nitrogen gas.
Disolving the copper coating off of pennies is fun.
Make soap bubbles in a dish using methane. Have someone scoop it up in their hand and then ignite it in a large burst of flame.
My AP physics teacher had a projectiles section where we launched pneumatic rockets at him from about 150 feet away. Each team's rocket launched at a slightly different pressure. We could time it's flight and measure the distance it went. We each had three shots to work out an appropriate launch angle and try and hit the teacher(A+) or get a lower grade for landing nearby.
I'd say: get a bed of nails. The bed of nails is probably the demo that hurts the most of the things I do, but it is not dangerous. It doesn't hurt just lying there, but then you put some brick s on you chest, and you get someone in the audience to break them with a sledgehammer. But it looks absolutely astonishing.
Check out David Willey's homepage. There's not much info on how to do things, but he does all kinds of weird things, and he's the guy who organized these firewalking record events.
Employee of Inrupt, Project Release Manager and Community Manager for Solid
Pour some liquid nitrogen in your mouth and breath out. It works and apparently is not dangerous if you do it right...
Fill paper cup with water, place on bunsen burner. Because the paper is thin, the cup is a fairly good thermal conductor. The paper never get's hot enough to catch fire as all the heat from the burner is conducted into the water.
I don't know about the Leidenfrost effect, but drinking liquid nitrogen is absolutely not safe. There was a notice in New Scientist not long ago when some undergraduate tried this, and failed. He spent like 3 weeks in intensive care, and parts of his stomach had to be replaced, IIRC.
So yeah, it looks cool (yes I've seen it), but personally I'd rather be slightly less cool in the eyes of the audience and not risk spending a month in intensive care. Of course, YMMW.
Demonstration of the Ideal Gas Law:
;)
:)
;) http://caselaw.lp.findlaw.com/cacodes/pen/12301-12 316.html
PV = nRT
Pressure × Volume = No. of moles × Universal Gas Constant × Absolute Temperature
First off, you will want to do this outside. All you need is a small amount of dry ice, water, and a plastic soda bottle (20oz, 1liter, or 2 liter are all fine). I would reccomend a 2 liter, because it's more impressive. Put enough dry ice in the bottle to barely cover the bottom of the empty 2 liter bottle. Then be ready for action, because you will want to put about an equal amount of water as dry ice in your bottle. After filling the bottle with water, the dry ice will start being convered to CO2 gas, and you will want to cap the bottle. Place it in the middle of a field or something and make sure everyone is well away from it.
You can take this time to explain that Dry Ice is a solid form of Carbon Dioxide, and when it is in a system with water, it undergoes sublimation (solid to gas, no liquid phase). And that it's gaseous volume is 800 times that of the solid volume. (so if you want to measure and get all scientific, you could).
Just about when you get done explaining this stuff, your experiment should alert you that it's ready. The pressure that the CO2 exerts on the closed volume system becomes too great, and the bottle gives and a rather loud sound is produced. Like everyone said, explosions are cool
So if we apply the science to it.
2 liters = (approx) 2000 cubic centimeters
2000cc/800 = 2.5cc of dry ice needed to fill the system with gas.
So lets say we put 5cc of ice, and 5 cc of water in.
5cc * 800 = 4000cc space needed for the gas to expand
system volume(2000cc) - water volume(5cc) = 1995cc
This would pretty much gaurantee an explosion. But for the kids, you might give them this information and see if they can come up with the minimum amount needed to make the bottle explode, make them draw upon some basic math skills
Ok, now that I've gone though all this, check your state laws to see if this fun experiment is illegal, it is here in california
Take two polarizing lenses and rotate those against each other.
I much rather like demonstrations that are counter-intuitive. Especially things that seem "supernatural" to do, yet are very natural indeed. I'd like to point out the work of David Willey, whom I've worked with. He organized a world-record firewalk, and I attended (yeah, I've got a world record in firewalking... :-) ).
Check out his article in Skeptical Inquirer: The Physics Behind Four Amazing Demonstrations.
David has done quite a lot of explosions and rocketry too, he knows all about that too, but his best demos is really those that seem risky, but are not. The liquid lead is among them.
Employee of Inrupt, Project Release Manager and Community Manager for Solid
When I was studying chemistry I had fun with this. Sorry, I'm used to MKS system. Prepare 1 liter of solution containing: 10 grams of NaOH 10 grams of C6H12O6 (any of the 16 works, only changes speed) 1 drop of 1% solution of Methilene-Blue (well, I've never used a drop, but directly joined a couple of grains) Fill half a bottle and close it. Within a little time it seems clear water, since NaOH+C6H12O6 turns Methilene-Blue to a not-oxidized state, but as you shake the bottle, the Oxigen takes it to blue again, then it turns again clear... You can repeat it some times; open the bottle if it doesn't work anymore: maybe you've consumed all the Oxigen... Have fun!
Dropping bits of sodium metal in water fizzes nicely, and demonstrates how alkali metals can break the H-OH bonds in water (IIRC). However, be very careful how much you use. A teacher of mine once did this, using larger and larger bits of sodium each time, until finally one bit was just a little too big and made an explosion that destroyed the dish and glass shield, and showered the front row with shards :)
Demonstration of a 'chip pan fire' - ignite a small crucible-full of cooking oil, stand well back, squirt with water from squeezy bottle. Fireballs up to the ceiling if you get it right :-)
Also the custard bomb (demonstrating speed of reaction increases with surface area) - can't remember the specifics, but it involved a spark in a custard tin with a small amount of very fine powder in it: big bang, lid blown off etc.
One of the most exciting on-the-benchtop physics experiments I have seen was a Wilson Cloud Chamber detecting cosmic rays. So simple yet it makes radiation visible. I was spellbound by something this simple.
Iodine clock reactions are the bomb. Especially if you pour your mixture back and forth between beakers so a stream of it is cascading at the time the color changes.
One that is simple and surprising and can actually be done and felt by students is to use the following:
1 large gyroscope - wheel with handles on each side can easily be improvised
1 Rotating chair
1 Student
Simply get the student to sit in the chair and hold the gyroscope so its rotational axis is horizontal i.e. the wheel is vertical. Then spin the wheel. Once its spinning the student should be told to tilt the gyroscope to one side - and wow the student and chair will start to move round, tip it the other way and the chair will stop and move in the other direction.
Even as someone with a degree in physics and a good understanding of the conservation of angular momentum it's a spooky experience.
Get a large bottle (those 5 gallon water cooler jugs work well). Swirl a little alcohol around inside, so it evaporates. Then light the top. You should get a nice ring of flame travelling down in the bottle, then back up.
I don't know what this demonstrates, but it looks cool.
These might be redundant. I wasn't about to read all 4+ pages to check...
1) Liquid nitrogen a rose and smash it
2) Liquid nitrogen something lead and demonstrate the pitch change when you strike it.
3) Frogs leg and some electricity
4) Swivel chair and big spinning heavy thing to hold to demonstrate the gyroscopic effect.
5) big long magnetic coil and aluminium disc demonstrating eddy currents and induced magnetism. (disc levitates)
6) anything with a van der graaf generator
7) reasonably high power red laser popping a green balloon inside a red balloon.
7) something safe and cheap you can give away that's fun and makes kids figure out how it works.
Anyway, cool experiments using a microwave oven, of course, include the grape experiment (leading to ball lightning, preferably), and the actual microwaved ball lightning experiments.
Also be sure to check out some of these other ones. I especially like the soap.
Be sure that you can defend yourself against the parents, though, as they will likely not be very pleased, and will want to rip your lungs out, or some such mischief.
Have a ball (lightning).
If you hold a pin/needle flat against the match with the pointy end touching the head when you wrap the foil round it, you can remove the pin to leave a small exhaust hole.
:)
That way you get the whole match flying across the room
See http://www.freecell.com/rockets/howto.html for more detail...
Warning: May contain nuts
I've amazed a few by taking a few ounces of nail polish cleaner in a glass and then dropping those foam-packaging chips in, one by one.
Won't work with anyone who took much interest in anything above 10th grad chemistry...
Our physics prof used a bowling ball. :)
He also had a student do it.
I'm not sure how well this relates, but some of the best technology oriented demonstrations i've ever heard of/seen, which also have a nice artistic flare to them would be from SRL
http://www.srl.org
as well as interesting/informative
One day back in the secondary school, there was a traffic accident (a pedestrian bumped by a car) just outside our school building and of course people were in window staring the scene. At some point our physics teacher came by, observed the scene for a little moment, and then declared: "There you see. Momentum prevails."
Magnesium burning in O2 is actually below 2000 C. The _color temperature_ of the light emitted by the flame is 5000C, though, but thats a different thing.
God I love nitpicking...
--------------
Death to the sarcasm impaired!
In high school, I was often asked to visit the lower school to do science demonstrations.
The all-time favorite was the Van DeGraff generator. There is something about your hair standing straight out that always amuses the kids. I also lit fluorescent tubes in my hand.
I got the best results by making them stand on a milk crate to keep them from discharging through the floor. Before they got down, I had them "slap me five" so they didn't feel the spark discharge.
You can use the demonstration as a lead-in for static attraction and repulsion and a whole raft of other topics depending on the age group.
Just make sure you get a -small- one. The one I used was 18 inches tall and came from Edmund Scientific.
By the way, if you haven't been to the Boston Museum of Science, then you haven't seen the worlds largest Van DeGraff generator. Quite a show!
http://www.mos.org/sln/toe/
-jake
Comment removed based on user account deletion
sheesh. We got some crazy people here. Seems like everyone's messing around with liquid nitrogen and microwaves and such.
The stuff I remember is a lot simpler:
bending water stream
1. air up a baloon and rub it against some cloth to get a nice clump of static electricity.
2. go turn on the tap water and hold the balloon really close to the stream *without* touching it. You will see the water bend towards the balloon. Fwee.
crushing can
you need tongs, a heat source (like a stove), a pot of cold/room temperature water, and an empty metal pop can
1. using the tongs, hold the pop can right-side up over the heat source until the can is really hot.
2. now quickly, still using the tongs, place the can upside-down into the water (part of the point is to make sure the mouth of the can is completely covered.)
The can should now be quickly and dramatically crushed. The reason is difference in air pressure coupled with rapid temperature change.
Also, of course, the levitating magnet thing is cool (superconductivity).
Another source for science demos is magic books. Go to some bookstore and pick out an interesting magic book. Just skim until you find one that exploits more science or math than misdirection. Some do, some don't. It's also possible to use magic tricks to get kids' attention and make a dramatic impression, as this post by DaveNay (532546) humorously demonstrates.
Furry cows moo and decompress.
Experiment 1. take a bobby pin or a needle a kleenex and a bowl of water. Take the kleenex with two hands and place the needle on top. Place the kleenex on the surface of the water. The needle will float. Experiment 2. Take some corn starch and a pail of water and a decent sized rock. Mix corn starch with the water until you have a liquid (so you could pour the content of the pail on the floor if you wanted) that is still thick. Take the rock and gently place it on the liquid. See it sink. Now take the rock out and take a ladder or a chair. Drop the rock into the pail from two meters high. Funny he? :) no splashes and it doesnt sink immediatly! :)
Experiment 3.
Go to a lake or have a pail of water you don't plan to keep. Have one person with five layers of jogging pants goggles and protective apparail trow one pound of sodium in a lake or drop it in the pail and run. Show it to people that are sitting at a distance.
This is also fun with the school toilets.
My favorite is the electric lightbulb that you can light with fire and blow out like a candle. It works like this:
------ gallows
| |
| L
|
|
|--h--|
| X | pedestal
The lightbulb L is hanging from a gallows. X contains the battery for the lightbulb. h is a small hole in the pedestal. The battery power is turned on and off by a phototransistor. If you bring a match or a lighter or any other flame to the lightbulb, it will shine through the hole and the phototransistor will turn on the battery, turning on L. After that you can remove the match/lighter because L itself will provide enough light to keep the phototransistor happy. But if you blow at the lightbulb, because it is suspended by a wire and not fixed, it will be moved by the airflow, so that it's not above the hole anymore. This means the phototransistor is now dark and the power is turned off. You have blown out the lightbulb.
Please clarify "plasma balls" and "between legs".
You can do it with grapes by cutting them almost in half then setting the two halves next to each other. I've done it.
I used to be the lab tech in a lead smelter. One day, taking the temperature (about 680F) on a kettle of soft lead (non-alloyed), a refinery rat ran a forklift into the stack of pallets I was standing on, causing me to fall partway into the kettle. Fortunately, Most of my body was below the level of the rim, so I kind of landed on my upper ribcage. My left arm, holding the thermocouple, went in up to the elbow... for about 200 milliseconds.... It's amazing what terror can do for you. It was, as always, about 130 degrees in the refinery, plus, I'd been helping skim a kettle, so I was pretty sweaty. I ended up with a somewhat pink arm with silvery, lead-covered hairs, and a melted thermocouple handle. The refinery supervisor joked that he was afraid they'd have to do a "de-shit" treatment on that batch.
It didn't even merit an incident report. The whole place was a death trap. It was pretty common to have one guy point out to another that he was on fire, and have the burning man ask to be put out, because he had his hands full. Quite a place.
I am not sure if anyone has suggested this already, but you can give a cool demonstration of the crushing force of atmospheric pressure in the following way:
Find the biggest hunk/jock in the crowd as a volunteer. Wrap him up in a trash bag up to his neck. Obviously leave his head sticking out. Then take a vacuum cleaner and suck the air out of the bag. This takes a little practice since you have to wrap the tube up in the bag and stick it down his back and make sure that everything seals reasonably well. Then ask him to move. He will be so stuck he cannot do anything at all...
Words of caution: Don't get his head involved. I am quite sure this will collapse your lungs if they got involved in the demo. Also, I never saw this tried with someone standing and probably with good reason because as the air is sucked out I am sure he/she would fall over like a rigid pole and injure themselves. Sit the victim on a chair or something like that.
Don't let the fact these *suggestions* are at darwinawards.com put you off. ;P
Silver nitrate, magnesium, and a drop of water
Drink liquid nitrogen!
They're completely safe really - I found them in "honourable mentions" so they're not actual, proper, Darwins!
This is a nice demo to show electrical resistance in wires. Take a decent sized battery, and some nicely fine steel wool. Apply electrical current so that it flows through the steel wool. The steel wool will glow and then burn due to the electrical resisance.
Sorry, I don't know the relevent math on this one.
Perform this expreiment on a non-flamable surface and use appropriate safety gear.
Do not allow students to wear necklaces or bracelets of steel wool and let the students apply electricty, (even if your back was turned for just a minute,) you may face diciplinary action from the administration.
"This sort of thin ain't my bag, baby!"
My chemistry teacher last semester pulled this one:
He had a couple of gasses in class, one of which was helium, and the other was a heavier-than-air gas, bromide something, I believe. To show us both how vibration worked, and something about gas laws, he sucked down first some helium, which we've all done, and know that it makes your voice very high. Then he sucked down some heavier-than-air gas, and his voice became very low. Then he had a girl in the class do the same thing.
Interesting.
sig?
Doc Staffan Andesson, does a theather of natural (physics) history. Quite effective. The audiance is in the story, learns a lot of science and history, while taking part of the story and experiments. Bombs and story is da thing.
There are some quicktime video clips: http://www.ambassaden.net/fysik/videoklipp/klipp1. html
and some streaming: http://www.ambassaden.net/fysik/kulturnatten2001/
A teacher I had would heat a rectangular, 1-gallon metal can, then cap it tightly and hang it from the ceiling. By the end of the lecture the can would be crushed.
When I studied physics (aged 16-18), our teacher came into the class and said he had a demo for us. He said that before each demonstration or experiment, teachers had to assess the demo for health and safety purposes -- and that "today's demo will be neither healthy nor safe".
He went on to connect about 450V AC across a glass rod, suspended by clamps above a wooden lab desk cover.
The glass rod became quite hot and then started to give off light -- a very white light -- and after a few mins the glass melted and broke the circuit.
I guess this was demonstrating the continuum between conductors and insulators, and electron excitation/relaxation and light emission, along with the material properties of glass (i.e. to get white light you would require electrons of a range of energy levels to drop state and emit photons of a broad range of frequencies -- hence you can conclude something about the atoms in the glass).
It was very cool.
"The noble art of losing face will one day save the human race"---Hans Blix
Scroll down to the bottom of the page for the American Chemical Society, North Jersey Section, Teacher Affiliates Group. There are several good crowd pleasers there.
Check out this group's (Lifters) web page for amazing experiments in what appears to be anti-gravity. There are simple and complex plans for others that wish to re-create these experiments.
http://jnaudin.free.fr/html/lifters.htm
One very simple one is setting a vacumer (?) to blow and balance a ping-pong ball in the air-stream. Trust me, it isn't as hard as it seems. Just try it. :) (Keyword: Bernouilly's Law)
... eehh... thingie on the side of the metal plate. (How do you call that thing violinists use to get sound out of their violin?).
Another one for demonstrating standing waves is the following. Set up a fairly thin metallic plate on a standard. Then spread out some sand on top of it. Now, with a little bit of experimenting, you can get very interesting patterns by using a violin
It seems these days that people are knowing less and less. Two instances I can think of.
A Lunar eclipse occured a few years back and my wife and I were at a bus stop looking up. Another person standing there asked what was happenning so we explained how the moon reflects light from the sun and that when it enters the earth's shadow you will see the eclipse... his response, "I don't believe in that"
Another instance where I got on the elevator and pressed the button for the second floor. In the building I live in the quickest way to the street is not to the ground floor and out to the lobby but off at the second floor and out the side of the building. The other person in the elevator started complaining that that since he had pressed the ground floor button before I pressed my second floor button that he should have his floor before I got mine??!!!
Go figure on these.
Demonstrate the dangers of George Bush's energy policy ;)
It is certainly important to show them spectacular events, but you should not forget that the essence of science is both surprise and understanding. So choose (at least) some things that they can easily understand (but keep the math out unless asked), and some experiments they can perform themselves. They get to watch enough in the schools already. I've seen that they enjoy *doing* things most. Good suggestions can be found at the exploratorium:
http://www.exploratorium.edu/snacks/snacksbysubjec t.html
In our afternoons, we usually feed them vacuumized sweets (alltime favorite), especially marshmellow mice work well, because they won't become sticky. Maybe one last suggestion: try not to mix children with and without physics classes in school: it makes explaining much harder, if some shout all the time - but we've heard this before... :/
Cheers
There's even a cool Escher print based on it.
This is not quite along the lines of violently hot or explosive materials, but it is quite surprising if you've never seen it: http://www.essex.ac.uk/psychology/visual/thatcher. html
The setup: a discussion about density.
Take two bricks. One is a real cinder brick, the other is a styrofoam brick painted grey to look like the other brick.
At an appropriate point, you pick up the styrofoam brick, pretending it's a real brick, and throw it at someone in the front row. Done right, the victim (and everyone else) believes a ~10 pound cinder brick is flying at them. In our class, the girl's reaction was to bat at the brick with both hands. Of course, it went flying, and she (and most of the rest of us) stared at it in shock for a couple seconds before figuring out what had happened.
-Thomas
The two "neat" experiments I remember professors doing in a chemistry lecture were:
1. lighting balloons of hydrogen. I think this was most impressive because people are conditioned to think that floating balloons on strings are simply helium. I came a lecture hall on my first day of freshman chemistry there were several balloons on strings... how cute. Then the professor lights a dowel rod about a meter long and pops each of the balloons. The resulting explosion is quite bright and loud. Good attention getter.
2. inhaling argon. I'm not sure how safe this one was, but as most people know you can suck in helium and get the whole Donald Duck voice thing. I also had a professor inhale argon (significantly heavier than air.) The resulting voice is very deep and eerie sounding.
Get a box, about the size of a bread box actually. Cut a 2-4 inch ROUND hole in one side, and cut most of another side off the box and replace with a plastic sheet, like a garbage bag or a length of saran-wrap. You need to be able to open and close the lid of the box still.
Now the danger (it isn't science if it isn't dangerous), light a piece of paper on fire, on a plate or something fireproof, and blow it out pretty quick so it generates a lot of smoke. Put this in the box and seal it up (make sure the flame is out, but still makes some smoke)
Now tap on the plastic side of the box and you can blow BIG smoke rings out the hole. You can shoot these things like 20 feet.
And now the kewl part, set a candle up about 10 ft from the box, and blow it out with the smoke ring. If you hit the candle with the center of the smoke ring, you blow it out. If you set it up on a table and get the aim down, you still blow the candle out after the smoke runs out.
BTW: This will set off smoke alarms and the like, so be prepared for that. If you disable your smoke detector, why not put a new battery in it while your there?
M@
Krispy Cream is people
I wish I could remember what the solution consisted of, but it is a neat little experiment that teaches that various phases of matter (in this case solids and liquids) can have the same index of refraction despite being very different chemically and physically. Hope ya like it!
today is spelling optional day.
Had a science teacher who once put some lighter fluid in a flask, knowing the students wouldn't notice it was in there. Filled the flask with water in front of us and then lit it... making it look like she had just lit tap water on fire. :)
Bringing them out to a desolate pond and dropping about 5 pounds of pure sodium in there?
No TiVo and no caffeine make me something something...
For this simple demonstration of vacuum you need an orange, a vessel (a drinking glass or cup with a diameter smaller than the orange), a small piece of combustible paper, and a match or lighter, to ignite the small piece of paper.
Put the paper in the vessel. Ignite the piece of paper. While the flame is going strong, push the orange firmly against the opening of the vessel. The flame will starve off to nothing pretty fast. More importantly, the gasses inside the vessel will cool rapidly, creating a vacuum inside the vessel.
You will then find that the orange is stuck quite stubbornly against the mouth of the vessel.
Kids usually like this.
By including this sig, the copyright holders of this work or collection unreservedly place it in the public domain.
This is one that a prof of mine did once, he stuck two electrodes through a pickle and sent a lot of electricity through it. The end result is a yellow glowing sodium based light source which looks really cool.
Anything can be a fuse.
Bore two holes partway into a scrap of 2X4 an inch or so apart. Take two copper rods and put them in the holes. Solder resisters of various sizes and wattage ratings between the two rods, so it looks like a ladder. Rig up a way to energize the rods from a good voltage source (Plug, cord, switch, AC outlet).
Plug it in, flip the switch, and watch the resistors pop, smoke and or burn. If you arrange the resistors the right way, they will pop in order from the bottom of the ladder to the top.
There is bar of some alloy sold through science supply houses. The bar can be bent into a horseshoe shape by hand, but the work-hardening done to the metal from the bending makes it too hard to bend back straight.
For some reason, the physical action of this demo reminds me of the demo that illustrates how much energy 100 watts is. Hook up a hand-cranked generator to a switch and then to a socket, into which is a 100W bulb. Crank away at the generator with the switch off, and it's easy. Switch the light bulb into the circuit and the cranking job is suddenly VERY DIFFICULT. Wiggling all those electrons is real work -- you're not apt to forget to turn the room lights off again after that.
[also misbehaves on Kuro5hin as Peahippo]
Put a burning candle in a glas jar which can be totally cealed, but is big enough for the candle to burn for some ten or twenty seconds. Ask the students what they think will happen if you let the jar (with the burning candle in it and the lid closed) fall to the ground (closing the jar is just to prevent any kind of wind blowing out candle during its descent). As a burning candle's oxygen supply depends on convection, and the falling jar is a zero gravity-system (in which there isn't any convection), the candle will cease to burn after far less then a second of falling. Just make sure you don't waste too much time between closing the lid and letting the jar fall down.
Water, stirring device, dry ice, universal (pH) indicator, strong + weak bases (sodium hydroxide / ammonia), strong + weak acids (sulfuric / acetic)
This may seem like a long list of requirements, but it's very cool- watch as the dry ice changes the pH to more acidic- pour some strong base in, for a quick color change, then a slow changing back to acid.
My HS chem teacher loves this demo. Attach a peice of rubber tubing to one of the classroom gas jets and stick a funnel in the other end of it to spread out the gas. Put a bit a diswashing soap in a flat container. Place the funnel flat side down in the soap, turn on gas. You will create a tower of bubbles filled with methane. Once you get a tower going, you can slice it off with a yardstick or something like that and it will float to the ceiling (or just up, if you're doing it outside.) Light a match and toss it at the cloud. Large, cool-looking fireball.
Wow, what a terrible name for this experiment.
In this case, the vacuum is doing nothing (as they often do), it is the pressure of the atmosphere holding the orange against the glass.
Do that experiment, then explain that and the weight of a 50 mile high column of air. Then explain that only 33ft of water exerts the same pressure.
Now we're talking science.
hilarious old mail message I found:
In my old Physics textbook (Fundamentals of Physics, Holliday and Resnick, 3rd
ed.) there is an essay by Jearl Walker (Cleveland State University and columnist for Scientific American. Some examples Walker performs:
* places his (wet) hand into a crucible of molten lead at 400 deg F.
* holds liquid nitrogen (-200 deg C) in his mouth.
* and yes, walks on hot coals:
"I have walked over hot coals on five occasions. For four of the walks I
was fearful enough that my feet were sweaty. However, on the fifth walk I
took my safety so much for granted that my feet were dry. The burns I
suffered were extensive and terribly painful. My feet did not heal for
weeks." He also relates some other mishaps: How too much water on his
hand caused molten lead to spatter on his arms and face. Liquid nitrogen
cracked two front teeth.
Received: from neptune.chem.uga.edu by mail6 (8.6.12/Netcom)
id GAA20736; Thu, 11 Jan 1996 06:47:37 -0800
Received: (from andy@localhost) by neptune.chem.uga.edu (8.6.12/8.6.9) id JAA00887; Thu, 11 Jan 1996 09:50:41 -0500
Date: Thu, 11 Jan 1996 09:50:41 -0500 (EST)
From: Andy Dustman
X-Sender: andy@neptune.chem.uga.edu
To: georgia-skeptics@netcom.com
Subject: Re: ATLANTA JOURNAL (1-9-96) 'A COOL HEAD ON HOT COALS'
In-Reply-To:
Message-ID:
Still another thing to do involves *three* polarizers. Place A & B at 90deg angle to each other - no light. Place C at 45deg angle in front of both - still no light. In back of both - still no light.
Place C *BETWEEN* A & B - WTF is that light doing coming through *NOW*????
When I was a cubscout leader, I stumbled on a cool idea used in a ceremony. Soak a cloth in a mixture of 40% acetone and 60% water (keeping it in a sealed jar so the acetone doesn't evaporate). Then you can light it on fire, and the evaporating acetone burns, but the cloth itself doesn't. A link to the details in the context of cubscouts is here
Fluids are non compressable.
For the demo, you need a couple of identical glass bottles with good, sturdy screw on caps.
Glass salad dressing bottles _should_ work. (As always, try it before you demo it in public!)
Have the kids select one of the bottles. Hand it around so that the kids KNOW it's glass. Everyone knows that glass breaks if you hit it hard enough.
Now, fill it with water. And I mean FILL IT! there can be absolutley NO air bubbles whatsoever in the bottle when it's capped. The best way to do this is to fill it and cap it underwater in a bucket.
Before you attempt the demo, make sure the now filled bottle is free of bubbles. Because while fulids are non-compressable, gases compress REALLY easily and that can result in a broken bottle and bits of glass flying everywhere. Safety gear is a MUST, as is a clear barrier between you and the audience. Just in case.
Take a LARGE nail with a LARGE head and a two by four, and use the water filled bottle as a hammer to drive the nail into the two by four. Don't hit the nail TOO hard and don't bang on thenail too many times.
The water essnetially turns the glass bottle into a solid hunk of sturdy matter, due to the incompressablilty of the water.
Keep in mind that every time you hit the nail with the bottle, you are inducing microscopic stress fractures in the glass at the point of impacts. Do this enough and the bottle will eventually break.
But for those few moments you are hammering a nail with a glass bottle full of water, you will have SEVERELY messed with the way the Universe works in the minds of the audience.
Once you've demonstrated that fluids are non-compressable, you can then demo some simple hydraulics with syringes and tubing.
And remember, wear safety glasses, an apron and have a shield between you and the audience.
Because occasionally, the Universe likes to mess with YOUR mind from time to time.
Guaranteed! This comment 100% Anthrax free!
The fun part is when you take something like a laptop, rotate a polarized fitler so it is black (hold it there), take another polarized filter and put it between the laptop and the first one. If you rotate it just right you will see through to the laptop.
I've seen it demonstrated by Jack Cohen (science writer and reproductive biologist). Its cool.
Do a google search to find a number of recipies.
Paul.
You are lost in a twisty maze of little standards, all different.
1.
Get a carpet bag and put a lot of broken glass in it. Walk on the glass barefoot, putting your full weight on it. Be sure to use a little whisk broom to sweep the glass off your feet before putting your foot back on the floor.
2.
Get some small dumbbells and an office chair that can spin a full 360. Tell them to hold their arms out and then spin them. Once spinning, tell them to pull their arms in. They'll spin surprisingly faster.
May it be of benefit.
The average laymen thinks scientists are just playing with toys when they see museum demos or visit a "science" store. They forget that science is a way of thought based on reproduceable experimentationa nd observation. It has generated more wealth per average living human being in the past three centuries than the tens of thousands of years of human existance under alternative ideologies.
This is easily the best demonstration i've ever seen. Fill a big glass measuring cylinder or beaker with water and enough indicator to make it noticably green, then drop some cubes of solid carbon dioxide in. It will bubble up through the green water, making it acidic as it goes, so the whole tube turns from green to yellow to red, and then when the bubbles hit the surfae you get streams of thick white gas streaming down the sides.
It looks like the "mad scientist" bit from any old monster movie.
Get this book. Has tons of examples of interesting physics principles. I cherish my copy from 1988 :p
4 71 02984X/qid=1034540370/sr=8-1/ref=sr_8_1/002-810948 7-6660861?v=glance&n=507846
http://www.amazon.com/exec/obidos/tg/detail/-/0
You are only popular on the Internet.
Liquid oxygen and alcohol.
A NASA presentation used a small sponge in a flat dish. Pour alcohol on the sponge and ignite it, producing an almost invisible small flame (you already know you can add chemicals to make the flame visible, but it is not necessary). Pour a small amount of liquid oxygen (far away) in something like a long-handled ladle (small cup with long handle -- metal probably needed so it won't be too fragile). Pour the liquid oxygen in the dish.
This should be done in a high-ceilinged gymnasium so the flame might not reach the ceiling. Ensure that there is not a fire alarm or sprinkler which will be set off by the demonstration. Test first. Might be safer outdoors...if it won't alarm neighbors and if you have alerted police and fire departments to ignore calls from neighbors and passerby.
en tea, beyatch
To be honest, I have forgotten the details of most of these experiments, so while I cannot give you exact methods or reasonings, the gist of the experiments should come through enough for you to consult with other sources and collegues to fill in the gaps of my mind.
To that end, the experiments:
1) Measuring the speed of sound - from this one I remember we first determined in class how you could measure the speed of sound, variables, and how you would set up the experiment, then what the answer would work out to be if done a certain way. Then, the class was led outside, and one person held two sticks and banged them together. Another person was instructed to listen for the return sound from the science building we were standing away from some number of feet. Someone else was timing with a stopwatch. I am not sure of the process, but from all of this we got data that we used in class to determine the speed of sound, based on how we should do it - we weren't that far off, if I remember right, for our height above sea level and the condition of the weather outside - and we were real close to what we had gotten in the classroom.
2) Hitting a target - perhaps a little closer to home today than then - basically calculating trajectories, parabolas, etc. In the classroom, we calculated given a certain amount of pressure in a rocket (we used an air powered rocket for safety and distance reasons), angle, etc - what was needed to be put into the rocket in order for it to hit a target set some distance away. Once we had calculated that, we then went out on the football field (to the amusement of the PE class of the period), and launched the rocket. We hit the target, as our calculations said we would (now, class, can anyone tell me how an ICBM works?).
3) Measuring the mass of an electron - OK, this one is REALLY fuzzy in my mind, and in the end, we were off by a whole heck of a lot, but not as much as you would think given the equipment. All I really remember about this was some very complex mathematics, a bit of reasoning, and the use of an old occiliscope and power supply.
4) Water below freezing - in this experiment, which involved more than I am letting on here - we showed in individual labs how you could keep water liquid, even though you brought it down below freezing. We used stainless steel containers, regular water, ice and salt in a styrofoam container to bring the water down that was in the stainless steel container, some thermometers, etc. I also remember another part of the lab that involved a different substance, that you heated, it went from solid to liquid, then you gradually cooled down to room temperature (by lowering the bunsen burner flame), but it stayed liquid. Then you let it cool off really well, still liquid, then you put in a seed of the solid substance, and it immediately crystalized solid again (in time for the next class, I suppose). Cool thing to watch.
Those are the ones among my favorites. They could be enhanced in different ways (like the trajectory one - build a spud cannon instead for the demo, on a stand that permits tilting it like a mortar, at known angles). Hope these help - good luck!
Reason is the Path to God - Anon
This is an experiment I did in a chem class back in high school. My memory might be a bit fuzzy.
:)
Pennies are not all copper, but a thin copper 'shell' around another metal. With a small file, file a few (3 or so) notches in the sides of the penny so that the other metal is exposed. Place the filed penny in a beaker and cover with acid (I don't remember which acid, probably sulfuric). After a while the acid will have 'eaten' away the other metal, leaving only the copper shell. This shell (you did wash away all the acid, of course) looks indistinguishable from an ordinary penny. Watch the students' faces as you throw the penny into a glass of water and it floats - then pick it off the surface of the water and crunch it into a little ball with your mighty fingers
Caveat Emptor is not a business model.
Try the alternate URL
http://apache.airnet.com.au/~fastinfo/microwave/
Methanol is commonly referred to as "Wood Alcohol," while "Rubbing Alcohol" is Isopropanol.
Regards,
James
There is a experiment which shows how heavy objects move through ice but it takes a little bit of time for the demonstration to finish. Equipment: a 5 gallon bucket, a bar of ice, a thin cable and two heavy objects. Put a bar of ice across the 5 gallon bucket, tie or hook two heavy objects to each end of a thin cable then place the cable over the ice. The pressure of the cable on the ice will cause it to melt and the cable will move down through the ice. The ice will reform after the cable has passed. Eventullay a loud thud will be heard as the cable passes completely through the ice and the objects fall to the bottom of the bucket but the bar of ice will still be present across the bucket. Experiment with different weights and ice thicknesses to get the experiment to complete within your required time limit.
Just watch Julius Sumner Miller. He dipped his hand in lead, and boy did it sting...
I've always been easy to entertain, but this experiment is pretty darn cool. I used a hard drive magnet and a 10' copper pipe I found at work. Drop the magnet down the pipe vertically and wait for it to appear at them bottom....Amazing. The folks at wondermagnet have a large assortment of neodymium magnets to choose from if you want something a little different than what the HD manufactures use.
Lindsay books is a good place to look for books on this line. (Get the catalog, it has more than the website lists) Several books contain interesting science experiments that you can try. Along with many other fun projects that Geeks will love.
I recall a slower paced but interesting reaction using a small camphor pelet tied on the back of a balsa wood boat with an elastic band. The reaction powered the boat nicely around a bath of water - sodium and phosphorous were near by, tiny bits of Sodium skidding around on the water surface. Of cousre, in thise days (early 70's) we all peered over the bowls and had goes ourselves, but the pieces were tiny and handled by tweezers!
Not just the rubber tire, right?
I'm sure you must have seen this at some point. Just connect a pickle across the a battery and turn off the lights.
On dipping hands in molten lead...scientists have always had a knack for doing weird things for the sake of logic. I mean after all, alchemists used to believe that drinking gold and mercury will bring longevity because their properties are stable. While that particular reason seemed logical at the time, I don't think we need to recount the aftermaths of these people...
Welcome to castle Anthrax...
You can get tapes of Julius Sumner Miller doing fun physics experiments from PBS and other sources. Great Fun.
Trasgu
As an aside, Mössbauer [sic] once told us how to get an effect named after you: call it something long and not acronym-friendly yourself first. He called his effect "Rückstossfreie Resonanzabsorption", or recoil-free resonance absorption. So quit shortly, people referred to it as Mössbauer effect instead...
Hurricane Application Group, Dept of Meteorology Control, Ministry of Proactive Defense
Not sure, but I think I had the same reaction when I dropped a couple of Mike 'n Ike's into a can of Coke.
:/
Only happened once, though.
What's this Submit thingy do?
My high-school AP Physics book had an article in it written by the author. There were a couple of demos he did frequently.
First was dipping his hand (wet!!!) into molten lead. He stopped that one when the lead got caught under his fingernails.
Second was putting liquid N2 in his mouth. He could blow clouds of fog for five or six feet. He stopped that one when the N2 contacted (and contracted) his front teeth. (His dentist convinced him to drop that one.)
Third was firewalking. He reasoned that his sweat would protect him from the coals...It worked until he was too comfortable with the idea to produce enough sweat.
He did find a demo that worked. One easy way to demonstrate the Liedenfrost effect was to heat up a frying pan to well, well beyond water's boiling temperature. If it's hot enough, individual drops of water will float on a tiny bed of steam, and dance around the pan for several minutes.
(I'd be careful about that one at home...Fires have been started from the pan's heat radiation. Don't leave it unattended. Keep a fire extinguisher handy.)
What's this Submit thingy do?
Someone should make a Mozilla version, the effect is totally lost with "Open unrequested windows" disabled. Also, bgsound doesn't work. :/
Here are three experiments that I've seen/done that I've thought were very impressive.
1. Take an empty gallon paint can. Drill a 3/8" hole in the center of the lid, and in the side about 1/2" from the bottom. With the lid on, purge the inside with natural gas. Now set it on the floor and light the top hole. This will produce a steady flame 2 or 3" in height. Now you have to do some acting. Make it seem like something cool is going to happen and get the viewers to watch intently. After a minute or two they will start to get bored as all that will happen is the flame will slowly appear to die. After a certain point, tell the viewers that something went wrong with the expermient and you'll have to try again once the flame has died out. As time progresses, the flame will grow smaller and will actually disappear from sight as it drops below the hole. Fairly shortly after it does this, the ratio of oxygen to gas in the paint can will reach the appropriate mixture and will explode launching the lid of the paint can about 8 ft' straight up, and startling everyone who has forgotten abot it. Obviously, this needs to be done well away from the audience.
2. This requires two large bricks of dry ice (about 12" square, 4-5" thick), some magnesium shavings and a blowtorch. Take the bricks of dry ice, and hollow out a small area so that you can stack them trapping a small pocket. Put the magnesium shavings in the pocket, and light them with the torch. Put the other brick on top sealing the thing in. Because magnesium can use carbon dioxide as it's oxygen source, it will continue to burn inside the dry ice. It produces a really incredible glowing effect from the ice. After burning for a while, the glow will reduce and will actually begin to pulse.
3. Finally there's Peryoxyacetone (sp?). I don't remember exactly how to make it, but you can find it in Chemical Demonstrations: A Handbook for Teachers in Chemistry by B. Z. Shakashiri. The books are excellent as a whole, the the peryoxyacetone, is escpecially impressive. It's a white powder that burns in a nice big fireball. It burns quickly enough (and at a fairly low temperature) though that it can be used to demonstrate the leidenfrost effect. Placing a small pile on the open palm of your hand you can light it, which creates an impressive looking fireball that you can't even feel. I'd suggest trying this on a piece of paper the first time. If you've got the right stuff, there won't even be a scorch mark on the paper.
My favorite simple demo for elementary students is to build a two pan balance with a meter stick hung from the ceiling by thread. Hang a balloon (uninflated) at each end of the stick with thread and paperclips so that they balance. Then blow up on of the balloons, and take a vote of whether the inflated balloon will be lighter or heavier than the uninflated balloon. Everyone is always surprised by the outcome.
Google, of course.
Yes, you pretty much can. It's found under the name muriatic acid. Google before you speak.
Tom Swiss | the infamous tms | my blog
You cannot wash away blood with blood
I regularly peform science demos for children (about once a week) and sometimes get to do them on "The Tonight show with Jay Leno", feel free to use any described at http://www.pitt.edu/~dwilley/hdatltwmenu.html hope this helps, cheers, David
Check out the educational windmill kit at: http://www.picoturbine.com I'm in the process of setting up the deluxe model.. -- Le MoOsE
When i was in high school my advanced physics class prepared a set of experiments that could teach scientific principles to elementary children. the ones i remember most fondly we're 1) laying a bed of nails a volunteer has a concrete brick placed on their stomach that is broken by a sledge hammer to the brink. -- this demonstrates the distribution of force 2) one team used an ethanol cannon ( bottle with spikes and ethanol in it .. set off with a tesla coil) to shoot a cork at a paper monkey ( weighted down by a few pennies suspended from the ceiling by paperclips and string. The strings put into the bottle and held in place with the cork in such a way that when the cork left the bottle it would let the paper drop.
-- demonstrates that objects of different mass always fall at the same rate ( because the cork will always hit the monkey if it was aiming at it before the explosion
3) there was the ever popular timing or clock reaction " where a set of chemicals, once mixed goes through several color changes at regular intervals that can be measured with a watch"
-- i don't remember what principle they where trying to demonstrate with that one.
4) i used "dust" explosions to demonstrate the scientific method. I had several kinds of "dust"
lychapodium powder ( I have no idea how to spell that word. I guessed it is a fungal spore), flour, corn starch.
We started with research, formed a "hypothesis" as to which of these would explode most violently and then did experimentation.
THE EXPERIMENT: take a coffee can and suspend it on a ring stand. Knock a whole in the bottom of the coffee can and place a piece of rubber hose with a funnel attached to it through the hole. Put a cotton ball in the funnel and a candle in the can. Place powder in the funnel. Light the candle and put the cover ( i had a metal one , i think plastic might burn) then blow lightly to make the dust circulate in the can. the lid will be blown off the can with a smoke and flame and loud pop.
Don't make the mistake of blowing on the cotton ball to put it out if it happens to be on fire in the can when you are done. My science teacher went eyebrow less for a while because of that mistake.
for those of you who don't know dust explosions are a chain reaction that occurs when a normally inert substance ( like flower or grain dust ) get enough air between the particles that a small spark causes an explosive chain reaction.
This was more relevant to the kids I was demoing for also because we were in rural Minnesota and this is what is responsible for the occasional violent explosion of grain elevators due to static electric spark and poor ventilation of grain dust. ( which has been known to kill people that work in grain elevators) since many of the children lived on farms and there parents would take produce to the elevator.
âoeTolerance applies only to persons, but never to truth. Intolerance applies only to truth, but never to persons.
I've seen some nice experiements that demonstrate Air pressure.
The first is the classic double-hemisphere. Take two cast-iron hemispheres (I assume you'd need to buy these somewhere). Show that the rims are not sticky, magnetic and do not lock in any way. Now evacuate them and see if anyone can pull them apart. I believe the original experiment failed to pull them apart even with a team or four strong horses.
The second is simpler. Lie a wooden ruler over the edge of a bench so a good few inches overhang. Now place a single sheet of broadsheet newspaper on the bench, covering the ruler. Which is stronger, the paper or the ruler? The ruler, right? Whack the free end of the ruler with a hammer and watch the amazed faces.
Hydrochloric Acid == Muriatic Acid
;)
(even says it on the page you linked to)
and it most certainly is commonly available at pool supply stores; is used to adjust the ph in pools.
I know because I have purchased it.
No comment on any "alternative uses" I might have had for it
I have visited (and performed in) several science demonstrations where the kids in the audience where frightened of explosions and fire. Scaring off you audience is a bad performance...
I honestly don't think that the kids that like explosions the most will be the best scientists later on! And it is rather obvious that the kids that DON'T like explosions might be the very ones that need to be reminded of the fun-ness of science.
Furthermore, the original question is about a workshop and not a demonstration/lecture. So I recomend:
* Do experiments that are easy to relate to for the kids.
* Do experiments with everyday things
* Do at least some experiments that are possible to fully understand for the kids (molecules and chemical reactivie are usually not part of kids view of the world)
Some suggestions:
* Battery from a lemon
* Eggs float in salt water but not in sweet
* Use BTB or other pH-indicator indicators to check the pH in various foods
* Paper chromatograpy on colour pencils
* Various kind of magnets (U-shaped, straight and stick-a-note-on-the-fridge type) and their effect on iron dust. Are all metals magnetic? Try coins, cans, keys etc.
* Catalysis - does sugar burn? How can you set fire to a sugar-cube? I bet my fellow /.-ers don't know the answer? Go find out! (and bring the contents of your local ashtray to experiment with...)
See video and pics here: http://vividpicture.com/aleks/orangeflame/index.ht ml
NB: Orange side of rind towards flame :)